Publications in Journals

“Scaled-Up Graphene Growth Through Chemical Vapor Deposition Over Large-Area Liquid Cu Catalysts”, by, Mahesh K. Prabhu, Christos Tsakonas, Yilei Tian, Marc de Voogd, Kees E. Kolmeijer, Anastasios Manikas, Gertjan van Baarle, Grégory F. Schneider, Costas Galiotis and Irene M. N. Groot, Advanced Materials Interfaces, 2401005, March 2025 (doi: 10.1002/admi.202401005)

“Colossal vertical conductivity enhancement in graphene by wrinkle engineering”, by, Marinos Dimitropoulos, Emilia Papasouli, Anastasios C. Manikas, Christos Tsakonas, Michel R´erat, Emmanuel N. Koukaras, Panaghiotis Karamanis and Costas Galiotis, Materials Today Nano, 29, 100575, 9 January 2025 (https://doi.org/10.1016/j.mtnano.2025.100575)

“Enhancing CFRP damping with graphene nanoplatelets: experiments versus finite element analysis”, by, Christos Vasilios Katsiropoulos, Georgios Giannopoulos, Panagiotis Pappas and Costas Galiotis, Nanotechnology, 36, 125702, 23 January 2025 (https://doi.org/10.1088/1361-6528/ada6be)

“Avoiding lateral failure of 2D materials subjected to large axial deformations”, by, Maria Giovanna Pastore Carbone, Anastasios C. Manikas, Ioanna Souli, George Anagnostopoulos, Elli Bellou and Costas Galiotis, Carbon, 1 January 2025 (https://doi.org/10.1016/j.carbon.2024.119983)

“Monitoring stress concentration in polymers with circular notch exploiting graphene-based sensors”, by, Elli Bellou, Anastasios C Manikas, Maria Giovanna Pastore Carbone, Stella Peloni, Christos Tsakonas and Costas Galiotis, Polymer, 316, 127860, 19 November 2024 (https://doi.org/10.1016/j.polymer.2024.127860)

“Interfacial properties and mechanical performance of hybrid graphene/carbon fibre composites”, by, Nikos Koutroumanis, Anastasios C Manikas, Panagiotis Nektarios Pappas, George Anagnostopoulos and Costas Galiotis, Materials Today Communications, 41, 110458, December 2024 (https://doi.org/10.1016/j.mtcomm.2024.110458)

“Highly efficient and responsive thin heaters based on CVD graphene/polyetherimide nanolaminates for next-gen thermal management applications”, by, Christos Pavlou, Maria Giovanna Pastore Carbone, Anastasios Manikas, Christos Tsakonas, Nikolaos Koutroumanis and Costas Galiotis, Chemical Engineering Journal, 497, 154744, 1 October 2024 (https://doi.org/10.1016/j.cej.2024.154744)

“Synthesis of graphene aerogels toward the absorption of liquid and gas pollutants”, by, George Gorgolis, George Paterakis and Costas Galiotis, arXiv preprint arXiv:2407.16392, 23/7/2024

“Enhanced removal of emerging contaminants from tap water by developing graphene oxide and nanoplatelet hybrid aerogels”, by, G. Gorgolis, F. Tunioli, G. Paterakis, M. Melucci, N. Koutroumanis, L. Sygellou, M. S. S. Bafqi, B. Saner Okan and C. Galiotis, RSC Advances, 14, 34504–34514, October 2024 (doi: 10.1039/d4ra05658b)

“Antifungal Hybrid Graphene-Transition-Metal Dichalcogenides Aerogels with an Ionic Liquid Additive as Innovative Absorbers for Preventive Conservation of Cultural Heritage”, by, George Gorgolis, Maria Kotsidi, Elena Messina, Valentina Mazzurco Miritana, Gabriella Di Carlo, Elsa Lesaria Nhuch, Clarissa Martins Leal Schrekker, Jeniffer Alves Cuty, Henri Stephan Schrekker, George Paterakis, Charalampos Androulidakis, Nikos Koutroumanis and Costas Galiotis, Materials, 17, issue 13, article no. 3174, July 2024 (doi: 10.3390/ma17133174)

“Graphene: revolutionising composite applications”, Graphene and 2D Materials, by Costas Galiotis, 9, pages 1-2, May 16 2024 (https://doi.org/10.1007/s41127-024-00080-y)

“Operando Characterization and MolecularSimulations Reveal the Growth Kinetics ofGraphene on Liquid Copper During ChemicalVapor Deposition”, by, Valentina Rein, Hao Gao, Hendrik H. Heenen, Wissal Sghaier, Anastasios C. Manikas, Christos Tsakonas, Mehdi Saedi, Johannes T. Margraf, Costas Galiotis, Gilles Renaud, Oleg V. Konovalov, Irene M. N. Groot, Karsten Reuter, and Maciej Jankowski, ACS NANO, 18, 12503–12511, April 2024 (https://doi.org/10.1021/acsnano.4c02070)

“Mechanical Integrity and Reinforcement Efficiency of Graphene Grown on Liquid Copper by Chemical Vapor Deposition“, by, Ilias Sfougkaris, Christos Tsakonas, Anastasios C. Manikas,* Maria Giovanna Pastore Carbone, Christos Pavlou, Irene M. N. Groot, Mehdi Saedi, Gertjan J. C. van Baarle, Marc de Voogd, Valentina Rein, Maciej Jankowski, Oleg V. Konovalov, Gilles Renaud, and Costas Galiotis, Advance Materials Interfaces, May 2024 (https://doi.org/10.1002/admi.202400193)

“Graphene aerogels as efficient adsorbers of water pollutants and their effect of drying methods”, by, G Gorgolis, M Kotsidi, G Paterakis, N Koutroumanis, C Tsakonas and C Galiotis, Scientific Reports, 14, 8029, 05 April 2024 (https://doi.org/10.1038/s41598-024-58651-1)

“Mechanical response of monolayer graphene via a multi-probe approach”, by, Javier Varillas, Jaroslav Lukeš, Anastasios Manikas, Jan Maňák, Jiří Dluhoš, Zuzana Melníková, Martin Kalbáč, Costas Galiotis and Otakar Frank, International Journal of Mechanical Sciences, 20 March 2024, 109208 (https://doi.org/10.1016/j.ijmecsci.2024.109208)

“Nanocarbon-based sheets: Advances in processing methods and applications”, by, Christos Kostaras,,Christos Pavlou, Costas Galiotis and Konstantinos G. Dassios, Carbon, 221, 118909, March 2024 (https://doi.org/10.1016/j.carbon.2024.118909)

“Fabrication and performance of capacitive humidity and strain sensors that incorporate 3D-printed nanocomposite electrodes”, by, Stefanos Matsalis, George Paterakis, Nikos Koutroumanis, George Anagnostopoulos and Costas Galiotis, Sensors International, 5 (2024) 100272 (https://doi.org/10.1016/j.sintl.2023.100272)

“MesoscopicModeling and Experimental Validation of Thermaland Mechanical Properties of Polypropylene Nanocomposites Reinforced By Graphene-Based Fillers”, by, Atta Muhammad, Rajat Srivastava, Nikolaos Koutroumanis, Dionisis Semitekolos, Eliodoro Chiavazzo, Panagiotis-Nektarios Pappas, Costas Galiotis, Pietro Asinari, Costas A. Charitidis, and Matteo Fasano, Macromolecules 2023, 56 (24), 9969-9982, December 6, 2023 (doi: 10.1021/acs.macromol.3c01529)

“High surface area g‑C3N4 nanosheets as superior solar‑light photocatalyst for the degradation of parabens”, by, S. Stefa,· M. Zografaki, · M. Dimitropoulos,· G. Paterakis,· C. Galiotis,· P. Sangeetha,· G. Kiriakidis,M. Konsolakis and· V. Binas, Applied Physics A, 129, Article number: 754, October 2023 (https://doi.org/10.1007/s00339-023-07032-y)

“Highly stretchable strain sensors based on Marangoni self-assemblies of graphene and its hybrids with other 2D materials”, by, Akouros Antonios, Koutroumanis Nikolaos, Manikas Anastasios C., Paterakis George, Carbone Maria Giovanna Pastore, Anagnostopoulos George, Dimitropoulos Marinos and Galiotis Costas, Nanotechnology, 34, Issue:29, Article Number:295501, July 16 2023 (doi:10.1088/1361-6528/acccfe)

“Understanding cure and interphase effects in functionalized graphene-epoxy nanocomposites”, by, Gkaliou Kyriaki, Trakakis George, Manikas Anastasios, Davies Philip R. R., Hall Jeremy, Galiotis Costas and Eaton Mark, Polymers for Advanced Technologies, Early Access June 2023 (doi: 10.1002/pat.6114)

“Tribology of Copper Metal Matrix Composites Reinforced with Fluorinated Graphene Oxide Nanosheets: Implications for Solid Lubricants in Mechanical Switches”, by, Savjani Nicky, Mercadillo Vicente Orts, Hodgeman Darren, Paterakis George, Deng Yubao, Valles Cristina, Anagnostopoulos George, Galiotis Costas, Bissett Mark and Kinloch Ian, ACS Applied nano materials, 6, Issue:10, pages: 8202-8213, May 10 2023 (doi. 10.1021/acsanm.3c00399)

“Novel Graphene-Based Materials as a Tool for Improving Long-Term Storage of Cultural Heritage”, by, George Gorgolis, Steffen Ziemann , Maria Kotsidi , George Paterakis, Nikos Koutroumanis, Christos Tsakonas, Manfred Anders and Costas Galiotis, Materials, 16, 3528, May 4 2023 (https://doi.org/10.3390/ma16093528)

“Ultrasensitive and highly selective detection of strontium ions”, by, Lijuan Feng, Hui Wang, Tingting Liu, Tiantian Feng, Meng Cao, Jiacheng Zhang, Tao Liu, Zhanhu Guo, Costas Galiotis, Yihui Yuan and Ning Wang, nature sustainability, 6, pages: 789–796, March 27, 2023 (https://doi.org/10.1038/s41893-023-01095-8)

“Rapid Resistive Heating in Graphene/Carbon Nanotube Hybrid Films for De-icing Applications”, by, Christos Kostaras*, Christos Pavlou, Nikolaos Koutroumanis, George Paterakis, George Trakakis, Costas Galiotis and Konstantinos Dassios, ACS applied nanomaterials, 6, issue:7, pages:5155-5167, March 16, 2023 (https://doi.org/10.1021/acsanm.2c04999)

“Graphene nanoplatelets and other 2D-materials as protective means against the fading of coloured inks, dyes and paints”, by, M. Kotsidi, G. Gorgolis, M. G. Pastore Carbone, G. Paterakis, G. Anagnostopoulos, G. Trakakis, A. C. Manikas, Pavlou, N. Koutroumanis and C. Galiotis, Nanoscale, 15, Issue:11, Pages: 5414-5428 16 March 2023 (doi: 10.1039/d2nr05795f)

“Highly Porous Thin-Layer g-C3N4 Nanosheets with Enhanced Adsorption Capacity”, by, Sofia Stefa, Maria Griniezaki, Marinos Dimitropoulos, George Paterakis, Costas Galiotis, George Kiriakidis, Emmanuel Klontzas, Michalis Konsolakis and Vassilios Binas, ACS Applied Nano Materials, 6, 3, 1732–1743, January 25, 2023 (https://doi.org/10.1021/acsanm.2c04632)

“Porphyrinic Metal–Organic Framework Quantum Dots for Stable n–i–p Perovskite Solar Cells”, by, Yinjiang Liu, Tao Liu, Xi Guo, Meichen Hou, Yihui Yuan, Se Shi, Hui Wang, Rui-Zhi Zhang, Costas Galiotis, and Ning Wang, Advanced Functional Materials, 33, 2210028, 17 January 2023 (doi. 10.1002/adfm.202210028)

“Nanomechanics of Ultrathin Carbon Nanomembranes“, by, Marinos Dimitropoulos , George Trakakis, Nikolaus Meyerbröker, Raphael Gehra, Polina Angelova , Albert Schnieders , Christos Pavlou, Christos Kostaras, Costas Galiotis and Konstantinos Dassios, Nanomaterials, 13, 267, 8 January 2023 (https://doi.org/10.3390/nano13020267)

“Wrinkle-mediated CVD synthesis of wafer scale Graphene/h-BN heterostructures”, by, Marinos Dimitropoulos, George Trakakis , Charalampos Androulidakis , Maria Kotsidi and Costas Galiotis, Nanotechnology, 34, 025601, 28 October 2022 (doi. 10.1088/1361-6528/ac98d0)

“Antifungal Graphene-based Absorbers as Advanced Materials for Preventive Conservation of Cultural Objects”, by, George Gorgolis, Elena Messina, Maria Kotsidi, Maria Paola Staccioli, Elsa Lesaria Nhuch, Gabriella Di Carlo, Henri Stephan Schrekker, George Paterakis, Nikos Koutroumanis and Costas Galiotis, Chemnanomat, 8, e202200265, September 2022 (doi.org/10.1002/cnma.202200265)

“Highly Sensitive and Ultra-Responsive Humidity Sensors Based on Graphene Oxide Active Layers and High Surface Area Laser-Induced Graphene Electrodes”, by, George Paterakis, Eoghan Vaughan, Dinesh R. Gawade, Richard Murray, George Gorgolis, Stefanos Matsalis, George Anagnostopoulos, John L. Buckley, Brendan O’Flynn, Aidan J. Quinn, Daniela Iacopino and Costas Galiotis, Nanomaterials, 12, 2684, 4 August 2022 (doi.org/10.3390/nano12152684)

“Hazard assessment of abraded thermoplastic composites reinforced with reduced graphene oxide”, by, Chortarea S, Kuru OC, Netkueakul W, Pelin M, Keshavan S, Song Z, Galiotis C, et al, Journal of Hazardous Materials, 435, May 2022 (https://doi.org/10.1016/j.jhazmat.2022.129053)

“Enhancement of damping response in polymers and composites by the addition of graphene nanoplatelets”, by, Christos Katsiropoulos, Panagiotis Nektarios Pappas, Nikolaos Koutroumanis, Anastasios Kokkinos and Costas Galiotis, Composites Science and Technology, 227, June 2022 (https://doi.org/10.1016/j.compscitech.2022.109562)

“Chemical Vapour Deposition Graphene–PMMA Nanolaminates for Flexible Gas Barrier”, by, Antonio Baldanza, Maria Giovanna Pastore Carbone, Cosimo Brondi, Anastasios C. Manikas, Giuseppe Mensitieri, Christos Pavlou, Giuseppe Scherillo and Costas Galiotis, membranes, 12, Article Number: 611, June 12 2022 (https://doi.org/10.3390/membranes12060611)

“Whey protein films reinforced with bacterial cellulose nanowhiskers: Improving edible film properties via a circular economy approach”, by, Papadaki Aikaterini, Manikas Anastasios C., Papazoglou Eleonora, Kachrimanidou Vasiliki, Lappa Iliada, Galiotis Costas, Mandala Ioanna and Kopsahelis Nikolaos, Food Chemistry, 385, Article Number: 132604, August 15 2022 (Doi: 10.1016/j.foodchem.2022.132604)

“Bioink with cartilage-derived extracellular matrix microfibers enables spatial control of vascular capillary formation in bioprinted constructs”,by, Terpstra Margo, Li Jinyu, Mensinga Anneloes, de Ruijter Mylene, van Rijen Mattie, Androulidakis Charalampos, Galiotis Costas, Papantoniou Ioannis, Matsusaki Michiya, Malda Jos, Levato Riccardo...Less, Biofabrication, 14, Article Number: 034104, July 1 2022 (doi:10.1088/1758-5090/ac6282)

“3D Printing Processability of a Thermally Conductive Compound Based on Carbon Nanofiller-Modified Thermoplastic Polyamide 12”, by, Zhang Zhenxue, Gkartzou Eleni, Jestin Simon, Semitekolos Dionisis, Pappas Panagiotis-Nektarios, Li Xiaoying, Karatza Anna, Zouboulis Panagiotis, Trompeta Aikaterini-Flora, Koutroumanis Nikolaos, Galiotis Costas, Charitidis Costas and Dong Hanshan, Polymers, 14, Article Number: 470, Feb. 2022 (Doi: 10.3390/polym14030470)

“Double cantilever beam test and micro-computed tomography as evaluation tools for self-healing of CFRPs loaded with DCPD microcapsules”, by, Artemis Kontiza, Dionisis Semitekolos, Tatjana Kosanovic Milickovic, Panagiotis Pappas, Nikolaos Koutroumanis, Costas Galiotis and Costas A. Charitidis, Composite Structures, 279, Article Number: 114780, January 2022 (https://doi.org/10.1016/j.compstruct.2021.114780)

“Nacre-like GNP/Epoxy composites: Reinforcement efficiency vis-`a-vis graphene content”, by, Fabricia Cilento, Alfonso Martone, Maria Giovanna Pastore Carbone, Costas Galiotis, and Michele Giordano, Composites Science and Technology, 211, Article Number: 108873, May 2021 (https://doi.org/10.1016/j.compscitech.2021.108873)

“Efficient Mechanical Stress Transfer in Multilayer Graphene with a Ladder-like Architecture”, by, Aristotelis P. Sgouros, Charalampos Androulidakis, Georgia Tsoukleri, George Kalosakas, Nikos Delikoukos, Stefano Signetti, Nicola M. Pugno, John Parthenios, Costas Galiotis, and Konstantinos Papagelis, ACS applied materials & interfaces, 13, Issue 3, 4473–4484, January 12 2021 (https://doi.org/10.1021/acsami.0c18774)

“Effective EMI shielding behaviour of thin graphene/PMMA nanolaminates in the THz range”, by, Christos Pavlou, Maria Giovanna Pastore Carbone, Anastasios C. Manikas, George Trakakis, Can Koral, Gianpaolo Papari, Antonello Andreone and Costas Galiotis, Nature Communications, 12, Article Number: 4655, 02 August 2021 (doi: https://doi.org/10.1038/s41467-021-24970-4)

"Real-Time Multiscale Monitoring and Tailoring of Graphene Growth on Liquid Copper”, by, Maciej Jankowski, Mehdi Saedi, Francesco La Porta, Anastasios C. Manikas, Christos Tsakonas, Juan S. Cingolani, Mie Andersen, Marc de Voogd, Gertjan J. C. van Baarle, Karsten Reuter, Costas Galiotis, Gilles Renaud, Oleg V. Konovalov, and Irene M. N. Groot, ACS nano, 15, 9638−9648, June 1 2021 (doi: https://doi.org/10.1021/acsnano.0c10377)

“Shape Memory Composite Sandwich Structures with Self-Healing Properties”, by, Fabrizio Quadrini, Denise Bellisario, Leandro Iorio, Loredana Santo, Panagiotis Pappas, Nikolaos Koutroumanis, George Anagnostopoulos and Costas Galiotis, Polymers, , 13, Issue 18, Article Number:3056, 10 September 2021 (doi: https://doi.org/10.3390/polym13183056)

“Preventing colour fading in artworks with graphene veils”, by, Maria Kotsidi, George Gorgolis, Maria Giovanna Pastore Carbone, George Anagnostopoulos, George Paterakis, Giovanna Poggi, Anastasios Manikas, George Trakakis, Pierro Baglioni and Costas Galiotis, Nature nanotechnology, 01 July 2021 (doi: https://doi.org/10.1038/s41565-021-00934-z)

“Multi-functional 2D hybrid aerogels for gas absorption applications”, by, Charalampos Androulidakis, Maria Kotsidi, George Gorgolis, Christos Pavlou, Labrini Sygellou, George Paterakis, Nick Koutroumanis and Costas Galiotis, Scientific Reports, 11, Article number: 13548, July 2021 (doi: https://doi.org/10.1038/s41598-021-92957-8)

“Determination of the elastic moduli of CVD graphene by probing graphene/polymer Bragg stacks”, by, Bohai Liu, Christos Pavlou, Zuyuan Wang, Yu Cang, Costas Galiotis and George Fytas, 2D Materials, 8, Issue 3, July 2021 (doi: 10.1088/2053-1583)

“Highly Deformable, Ultrathin Large-Area Poly(methyl methacrylate) Films”, by, Maria Pantano, Christos Pavlou, Maria Giovanna Pastore Carbone, Costas Galiotis, Nicola M. Pugno and Giorgio Speranza, ACS OMEGA, 6, Issue:12, 8308-8312, March 2021 (doi: 10.1021/acsomega.1c00016)

“In situ kinetic studies of CVD graphene growth by reflection spectroscopy”, by, Christos Tsakonas, Anastasios C. Manikas, Mie Andersen, Marinos Dimitropoulos, Karsten Reuter and Costas Galiotis, Chemical Engineering Journal, March 2021 (doi: 10.1016/j.cej.2021.129434)

“Impact of prolonged environmental exposure on stress transfer efficiency in poly(p-phenylene terephthalamide)/epoxy composites”, by, George Anagnostopoulos, Emmanuel Koukaras, John Parthenios and Costas Galiotis, Polymer Composites, 42, Issue: 4, 1901-1911, April 2021 (doi: 10.1002/pc.25945)

“Multifunctional Cement Mortars Enhanced with Graphene Nanoplatelets and Carbon Nanotubes”, by, Panagiota T. Dalla , Ilias K. Tragazikis , George Trakakis , Costas Galiotis , Konstantinos G. Dassios, and Theodore E. Matikas, Sensors 2021, 21, Issue: 3, 993, February 2021 (doi.org/10.3390/s21030933)

“Growth and in situ characterization of 2D materials by chemical vapour deposition on liquid metal catalysts: a review”, by, Christos Tsakonas, Marinos Dimitropoulos, Anastasios C. Manikas and Costas Galiotis, Nanoscale, 13, Issue: 6, 3346-3373, February 2021 (doi: 10.1039/d0nr07330j)

“Visible Laser Scribing Fabrication of Porous Graphitic Carbon Electrodes: Morphologies, Electrochemical Properties, and Applications as Disposable Sensor Platforms”, by, Eoghan Vaughan, Cathal Larrigy, Michael Burke, Labrini Sygellou, Aidan J. Quinn, Costas Galiotis and Daniela Lacopino, ACS Applied Electronic Materials, 2, Issue: 10, 3279-3288, October 2020 (doi: 10.1021/acsaelm.0c00612)

“Thermomechanical behaviour of hexagonal boron nitride at elevated temperatures”, by, Charalampos Androulidakis and Costas Galiotis, 2D MATERIALS, 7, Issue: 4, Article Number: 045011, October 2020 (doi: 10.1088/2053-1583/ab9ea5)

“Mechanical, Electrical, and Thermal Properties of Carbon Nanotube Buckypapers/Epoxy Nanocomposites Produced by Oxidized and Epoxidized Nanotubes”, by, George Trakakis, Georgia Tomara, Vitaliy Datsyuk, Labrini Sygellou, Asterios Bakolas, Dimitrios Tasis, John Parthenios , Christoforos Krontiras, Stavroula Georga, Costas Galiotis and Kostas Papagelis, Materials, 13, Issue:19, Article Number: 4308, October 2020 (doi: 10.3390/ma13194308)

“Hierarchy of nanoscale graphene wrinkles on compliant substrate: Theory and experiment”, by, Charalampos Androulidakis, Emmanuel N. Koukaras, Krishna Sampathkumar, Jaroslava Rahova, Costas Galiotis and Otakar Frank, Extreme Mechanics Letters, 40, Article Number: art. 100948, August 2020 (doi: 10.1016/j.eml.2020.100948)

“Thermomechanical Response of Supported Hexagonal Boron Nitride Sheets of Various Thicknesses”, by, Lambros Seremetis, Emmanuel Koukaras , Sotiria Alexandri, Antonis Michail, George Kalosakas, John Parthenios, Costas Galiotis, Sotirios Tsirkas, Spyridon Grammatikopoulos and Konstantinos Papagelis, Journal of Physical Chemistry, 124, Issue: 22, 12134-12143, Jun 4 2020 (doi: 10.1021/acs.jpcc.0c01029)

“Porous carbon nanotube networks and pillared graphene materials exhibiting high SF6 adsorption uptake and separation selectivity of SF6/N2 fluid mixtures: A comparative molecular simulation study”, by, Ioannis Skarmoutsos, Emmanuel N. Koukaras, Costas Galiotis, George E. Froudakis and Emmanuel Klontzas, Microporous and Mesoporous Materials, 307, Article Number:110464, November 2020 (doi: 10.1016/j.micromeso.2020.110464)

“2020 Roadmap on Carbon Materials for Energy Storage and Conversion”, by, Wu Mingguang, Liao Jiaqin, Yu Lingxiao, Lv Ruitao, Li Peng, Sun Wenping, Tan Rou, Duan Xiaochuan, Zhang Lei, Li Fang, Galiotis Costas, ...More, Chemistry–an–Asian Iournal, 15, Issue: 7, 995-1013, April 2020 (doi: 10.1002/asia.201901802)

“Thermal properties enhancement of epoxy resins by incorporating polybenzimidazole nanofibers filled with graphene and carbon nanotubes as reinforcing material”, by, Datsyuk V, Trotsenko S., Trakakis G., Boden A., Vyzas-Asimakopoulos K., Parthenios J., Galiotis C., Reich S. and Papagelis K., Polymer testing, 82, Article Number: 106317, February 2020 (doi: 10.1016/j.polymertesting.2019.106317)

“Tunable macroscale structural superlubricity in two-layer graphene via strain engineering”, by, Androulidakis, Charalampos, Koukaras Emmanuel N., Paterakis George, Trakakis George and Galiotis Costas, Nature Communications, 11, Issue: 1, Article Number: 1595, March 2020 (doi: 10.1038/s41467-020-15446-y)

“Improving the damping behavior of fiber-reinforced polymer composites with embedded superelastic shape memory alloys (SMA)”, by, C V Katsiropoulos, P Pappas, N Koutroumanis, A Kokkinos and C Galiotis, Smart Materials and Structures, 29, Article Number 2, January 2020 (doi.org/10.1088/1361-665X/ab6026)

“Fabrication and Electrochemical Properties of Three-Dimensional (3D) Porous Graphitic and Graphenelike Electrodes Obtained by Low-Cost Direct Laser Writing Methods”, by, Burke Micheal, Larrigy Cathal, Vaughan Eoghan, Paterakis George, Sygellou Labrini, Quinn Aidan J., Herzog Gregoire, Galiotis Costas and Iacopino Daniela, ACS Omega, 5, Issue: 3, 1540-1548, January 2020 (doi: 10.1021/acsomega.9b03418)

“Graphene and related materials in hierarchical fiber composites : Production techniques and key industrial benefits”, by, Valorosi Filippo, De Meo Enea, Blanco-Varela Tamara, Martorana Brunetto, Veca Antonino, Pugno Nicola, Kinloch Ian, Anagnostopoulos George, Galiotis Costas, Bertocchi Francesco, ...More, Composites Science and Technology, 185, Article Number: 107848, January 2020 (doi: 10.1016/j.compscitech.2019.107848)

“Development of a reactor for the in situ monitoring of 2D materials growth on liquid metal catalysts, using synchrotron x-ray scattering, Raman spectroscopy, and optical microscopy”, by, Saedi Mehdi, de Voogd J. M.,Sjardin A., Manikas A., Galiotis C., Jankowski M., Renaud G., La Porta F., Konovalov O., van Baarle G. J. C. and Groot, I. M. N., Review of scientific instruments, 91, Issue:1, Article Number: 013907, January 2020 (doi: 10.1063/1.5110656)

“Stress-transfer from polymer substrates to monolayer and few-layer graphenes”, by, Androulidakis C , Sourlantzis D, Koukaras EN, Manikas AC, and Galiotis C, Nanoscale Advances, 1, Issue: 12 4972-4980, December 2019 (doi: 10.1039/c9na00323a)

“Effect of Carbon Support on the Electrocatalytic Properties of Pt-Ru Catalysts”, by, Hasa Bjorn, Martino Eftychia, Vakros John, Trakakis George, Galiotis Costas and Katsaounis Alexandros, Chemelectrochem, 6, 4970 – 4979, October 2019 (doi: 10.1002/celc.201900566)

“Wettability of graphene by molten polymers”, by, Carbone, Maria Giovanna Pastore, Tammaro Daniele, Manikas Anastasios C., Paterakis George, Di Maio Ernesto and Galiotis Costas, Polymer, 180, Article Number: UNSP 121708, October 2019 (doi: 10.1016/j.polymer.2019.121708)

“Stress transfer at the nanoscale on graphene ribbons of regular geometry”, by, A. C. Manikas, M. G. Pastore Carbone, C. R. Woods, Y. Wang, I. Souli, G. Anagnostopoulos, M. Hadjinicolaou, K. S. Novoselov and C. Galiotis, Nanoscale, 11, 14354 – 14361, July 2019 (doi. 10.1039/C9NR03166A)

“Production and Mechanical Characterization of Graphene Micro-Ribbons”, by, Maria Giovanna Pastore Carbone, Georgia Tsoukleri, Anastasios C. Manikas, Eleni Makarona, Christos Tsamis and Costas Galiotis, Journal of Composites Sciences, 3, Issue:42, April 2019 (doi.org/10.3390/jcs3020042)

“Investigation of charges-driven interactions between graphene and different SiO2 surfaces”, by, Pantano Maria F., Iacob Erica, Picciotto, Antonino, Margesin, Benno, Centeno, Alba, Zurutuza, Amaia, Galiotis Costas, Pugno, Nicola M. and Speranza Giorgio, Carbon, 148, 336-343, 2019 (doi: 10.1016/j.carbon.2019.03.071)

"Mosaic pattern formation in exfoliated graphene by mechanical deformation", by, Maria Giovanna Pastore Carbone, Anastasios Manikas, Ioanna Souli, Christos Pavlou, and Costas Galiotis, Nature Communications, 10, Article Number: 1572, April 2019 (doi. 10.1038/s41467-019-09489-z)

“Sculpturing graphene wrinkle patterns into compliant substrates” by, Krishna Sampathkumar , Charalampos Androulidakis, Emmanuel Koukaras, Jaroslava Rahova, Karolina Drogowska, Martin Kalbac, Aliaksei Vetushka, Antonin Fejfar, Costas Galiotis and Otakar Frank, Carbon, 146, 772-778, 2019 (doi.org/10.1016/j.carbon.2019.02.041)

“Benchmarking of graphene-based materials: real commercial products versus ideal graphene” by, Kovtun Alessandro, Treossi Emanuele, Mirotta Nicola, Scida Alessandra, Liscio Andrea, Christian Meganne, Valorosi Filippo, Boschi Alex, Young Robert, Galiotis Costas, Kinloch Ian, Morandi Vittorio and Palermo Vincenzo, 2D Materials, 6/ 2, 025006, 2019 (doi. 10.1088/2053-1583/aafc6e)

“Enhancing the adhesion of graphene to polymer substrates by controlled defect formation” by, Anagnostopoulos George, Sygellou Labrini, Paterakis George, Polyzos Ioannis, Aggelopoulos Christos and Galiotis Costas. Nanotechnology, 30, 1, 015704, 2019 (doi. 10.1088/1361-6528/aae683)

“3-Arm star pyrene-functional PMMAs for efficient exfoliation of graphite in chloroform: fabrication of graphene-reinforced fibrous veils” by, Gkermpoura Sandra, Papadimitriou Konstantinia D., Skountzos Emmanuel N., Polyzos Ioannis, Carbone Maria Giovanna Pastore, Kotrotsos Athanasios, Mavrantzas Vlasis G., Galiotis Costas and Tsitsilianis Constantinos, Nanoscale, 11, 3, 915-931, Jan 2019, (doi. 10.1039/c8nr06888g)

“Strain Engineering in Highly Wrinkled CVD Graphene/Epoxy Systems” by, Anagnostopoulos G, Paterakis G, Polyzos I, Pappas PN, Kouroupis-Agalou K, Mirotta N, Scida A, Palermo V, Parthenios J, Papagelis K and Galiotis C, ACS Applied Materials & Interfaces, 10, 49, 43192-43202, 2018 (doi. 10.1021/acsami.8b14698)

“Non-Eulerian behavior of graphitic materials under compression” by, Androulidakis Ch, Koukaras E, Hadjinicolaou M and Galiotis C, Carbon, 138, 227-233,2018 (doi. 10.1016/j.carbon.2018.06.011)

188 “A mechanical system for tensile testing of supported films at the nanoscale” by Pantano Maria, Speranza Giorgio, Galiotis Costas, and Pugno Nicola, Nanotechnology, 29, 395707, 2018 (doi. 10.1088/1361-6528/aacf50)

“Controllable, eco-friendly, synthesis of highly crystalline 2D-MoS2 and clarification of the role of growth-induced strain” by Michail Antonios, Parthenios John, Anestopoulos Dimitris, Galiotis Costas, Christian Meganne, Ortolani Luca, Morandi Vittorio, and Papagelis Konstantinos, 2D Materials, 5, 035035, 2018 (doi. 10.1088/2053-1583/aac610)

“Strained hexagonal boron nitride: Phonon shift and Gruneisen parameter” by Androulidakis Ch, Koukaras E, Poss M, Papagelis K, Galiotis C, and Tawfick S, Physical Review B, 97, 241414, 2018 (doi. 10.1103/PhysRevB.97.241414)

“Compressive response and buckling of graphene nanoribbons” by Sgouros A, Kalosakas G, Papagelis K, and Galiotis C, Scientific Reports (Nature), 8, 9593, 2018 (doi. 10.1038/s41598-018-27808-0)

“A novel mild method for surface treatment of carbon fibres in epoxy-matrix composites” by Koutroumanis Nikos, Manikas Anastasios, Pappas Panagiotis-Nektarios, Petropoulos Faidonas, Sygellou Lamprini, Tasis Dimitrios, Papagelis Kostas, Anagnostopoulos George, and Galiotis Costas, Composites Science And Technology, 157, 178-184, 2018 (doi. 10.1016/j.compscitech.2018.01.048)

“Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification” by Zanjani Jamal, Seyyed Monfared, Okan Burcu Saner, Pappas Panagiotis-Nektarios, Galiotis Costas, Menceloglu Yusuf Ziya, and Yildiz Mehmet, Composites Part A- Applied Science And Manufacturing, 106, 1-10, 2018 (doi: 10.1016/j.compositesa.2017.12.008)

“An Evaluation of Graphene as a Multi-Functional Heating Element for Biomedical Applications” by Anagnostopoulos George, Treossi Emanuele, Parthenios John, Papagelis Konstantinos, Palermo Vincenzo, and Galiotis Costas, Journal of Biomedical Nanotechnology 14 (1), 86-97, 2018 (doi. 10.1166/jbn.2018.2472)

“Evaluating arbitrary strain configurations and doping in graphene with Raman spectroscopy” by Niclas Mueller , Sebastian Heeg , Miriam Peña Alvarez, Patryk Kusch, Sören Wasserroth, Nick Clark, Fred Schedin, John Parthenios, Konstantinos Papagelis, Costas Galiotis, Martin Kalbác, Aravind Vijayaraghavan, Uwe Huebner, Roman Gorbachev, Otakar Frank and Stephanie Reich, 2D Materials, 5, 1, 015016, 2018 (doi.org/10.1088/2053-1583/aa90b3)

“Atomistic potential for graphene and other sp(2) carbon systems” by Fthenakis Zacharias, Kalosakas George, Chatzidakis Georgios, Galiotis Costas, Papagelis Konstantinos, and Lathiotakis Nektarios, Physical Chemistry Chemical Physics, 19, 45, 30925-30932, 2017 (doi. 10.1039/C7CP06362H)

“Wrinkling formation in simply-supported graphenes under tension and compression loadings” by Ch. Androulidakis, E. N. Koukaras, M. G. Pastore Carbone, M. Hadjinicolaou and C. Galiotis, Nanoscale, 9, 18180, 2017 (doi. 10.1039/c7nr06463b)

“Graphene: A new activator of sodium persulfate for the advanced oxidation of parabens in water’’ by Bekris L, Frontistis Z., Trakakis G, Sygellou L, Galiotis C, and Mantzavinos D, Water Research, 126, 111-121, 2017 (doi. 10.1016/j.watres.2017.09.020)

‘’Wrinkled few-layer graphene as highly efficient load bearer’’ by Androulidakis C., Koukaras E, Rahova J., Sampathkumar K, Parthenios J, Papagelis K, Frank O and Galiotis C, ACS Applied Materials & Interfaces, 9 (31), 26593-26601, 2017 (doi. 10.1021/acsami.7b07547)

“Graphene aerogels: a review” by Gorgolis George and Galiotis Costas, 2D Materials, 4(3), 032001, 2017 (doi. 10.1088/2053-1583/aa7883)

“Compression behavior of simply-supported and fully embedded monolayer graphene: Theory and experiment” by Koukaras E, Androulidakis C, Anagnostopoulos G, Papagelis K, and Galiotis C, Extreme Mechanics Letters, 8, 191-200, 2016 (doi. 10.1016/j.eml.2016.03.016)

"Curvature-dependent surface energy for free-standing monolayer graphene" by Sfyris D and Galiotis C, Mathematics And Mechanics Of Solids, 21(7), 812-825, 2016 (doi.org/10.1177%2F1081286514537667)

“Mechanical Stability of Flexible Graphene-Based Displays” by George Anagnostopoulos, Panagiotis-Nektarios Pappas, Zheling Li, Ian A. Kinloch, Robert J. Young, Kostya S. Novoselov, Ching Yu Lu, Nicola Pugno, John Parthenios, Costas Galiotis, and Konstantinos Papagelis, ACS Appl. Mater. Interfaces, 8(34), 22605–22614, 2016 (doi. 10.1021/acsami.6b05227)

“Stress and charge transfer in uniaxially strained CVD graphene” by: Milan Bousa, George Anagnostopoulos, Elena del Corro, Karolina Drogowska, Jan Pekarek, Ladislav Kavan, Martin Kalbac, John Parthenios, Konstantinos Papagelis, Costas Galiotis, Otakar Frank, Physica Status Solidy (B) Basic Research, 2016, (doi: 10.1002/pssb.201600233)

“Uniaxial compression of suspended single and multilayer graphenes” by Sgouros A. P, Kalosakas G, Galiotis C and Papagelis K, 2D Materials, 3, 025033, 2016 (doi. 10.1088/2053-1583/3/2/025033)

“Optical detection of strain and doping inhomogeneities in single layer MoS2” by A. Michail, N.Delikoukos, J. Parthenios, C. Galiotis and K. Papagelis, Applied Physics Letters, 108, 173102, 2016 (doi. 10.1063/1.4948357)

“Phenomenological multiscale finite element for single layer graphene” by T.C. Theodosiou, C. Galiotis and D.A. Saravanos , Computational Materials Science, 115, 125-126, 2016 (doi. 10.1016/j. commatsci.2016.01.006)

“Electrochemically exfoliated graphene/PEDOT composite films as efficient Pt-free counter electrode for dye-sensitized solar cells” by M. Belekoukia, MS Ramasamy, Yang Sheng, Feng Xinliang, G. Paterakis, V.Dracopoulos, C. Galiotis, and P. Lianos, Electrochimica Acta, 194, 110-115, 2016 (doi. 10.1016/j.electacta.2016.02.073)

“Work Function Tuning of Reduced Graphene Oxide Thin Films” by L. Sygellou, G. Paterakis, C. Galiotis and D. Tasis, Journal Of Physical Chemistry C, 120, 281-290, 2016 (doi. 10.1021/acs.jpcc.5b09234)

“Molecular Modeling Combined with Advanced Chemistry for the Rational Design of Efficient Graphene Dispersing Agents” by KD Papadimitriou, EN Skountzos, SS Gkermpoura, I Polyzos, VG Mavrantzas, C Galiotis, and C Tsitsilianis, ACS Macro Letters, 5, 24-29, 2016 (doi. 10.1021/acsmacrolett.5b00755)

“Oxidation resistance of aligned carbon nanotube-reinforced silicon carbide composites” by Mei Hui, Bai Qianglai, Dassios Konstantinos G., Ji Tianming, Xiao Shanshan, Li Haiqing, Cheng Laifei and Galiotis Costas, Ceramics International, 41, 12495-12498, 2015 (doi. 10.1016/j.ceramint.2015.06.002)

“Colloidal stabilization of graphene sheets by ionizable amphiphilic block copolymers in various media” by Popescu MT, Tasis D, Papadimitriou KD, Gkermpoura S, Galiotis C and Tsitsilianis C, RSC Advances, 5, 89447-89460, 2015 (doi. 10.1039/c5ra17916e)

“Graphene flakes under controlled biaxial deformation” by C. Androulidakis, E. N. Koukaras, J. Parthenios, G. Kalosakas, K. Papagelis and C. Galiotis, Scientific Reports (Nature), 5, 18219, 2015 (doi. 10.1038/srep18219)

“Epoxidized multi-walled carbon nanotube buckypapers: A scaffold for polymer nanocomposites with enhanced mechanical properties” by G. Trakakis, G. Anagnostopoulos, L. Sygellou, A. Bakolas, J. Parthenios, D. Tasis, C. Galiotis and K. Papagelis, Chemical Engineering Journal, 281, 793-803, 2015 (doi. 10.1016/j.cej.2015.06.085)

“Effect of the reduction process on the field emission performance of reduced graphene oxide cathodes" by Sygellou L., Viskadouros G., Petridis C., Kymakis E., Galiotis C., Tasis D.,and Stratakis E., RSC Advances, 5/66, 53604-53610, 2015 (doi. 10.1039/c5ra08633g)

“Phonon properties of graphene derived from molecular dynamics simulations” by Emmanuel N. Koukaras, George Kalosakas, Costas Galiotis and Konstantinos Papagelis, Scientific Reports (Nature) , 5, 2015 (doi. 10.1038/srep 12923)

“Suspended Monolayer Graphene under True Uniaxial Deformation” by I. Polyzos, M. Bianchi , L. Rizzi, E. Koukaras, J. Parthenios, K. Papagelis, R. Sordan and C. Galiotis, Nanoscale, 7, 13033-13042, 2015 (doi. 10.1039/c5nr03072b)

“Graphene resting on substrate: closed form solutions for the perfect bonding and the delamination case” by D. Sfyris, Ch. Androulidakis and C. Galiotis, International Journal of Solids and Structures, 71, 219-232, 2015 (doi. 10.1016/j.ijsolstr.2015.06.024)

“Graphene as a hexagonal 2-lattice: Evaluation of the in-plane material constants for the linear theory. A multiscale approach” by D. Sfyris, E.N. Koukaras, N. Pugno and C. Galiotis, Journal of Applied Physics, 118(7), 075301, 2015 (doi. 10.1063/1.4928464)

“Constitutive modelling of some 2D crystals: Graphene, hexagonal BN, MoS2, WSe2 and NbSe2” by D. Sfyris, G. Sfyris, C. Galiotis, International Journal of Solids and Structures, 66, 98-110, 2015 (doi. 10.1016/ j.ijsolstr.2015.03.030)

“Embedded trilayer graphene flakes under tensile and compressive loading” by”G. Tsoukleri, J. Parthenios, C. Galiotis, K. Papagelis, 2D Materials, 2(2), 024009, 2015 (doi. 10.1088/2053-1583/2/2/024009)

“Deformation of Wrinkled Graphene” by Zheling Li, I.A. Kinloch, R. J. Young, K. S. Novoselov, G. Anagnostopoulos, J. Parthenios, C. Galiotis, K. Papagelis, Ching-Yu Lu and L. Britnell, ACS Nano, 9/ 4, 3917-3925, 2015 (doi. 10.1021/nn507202c)

“Nonlinear subharmonic oscillation of orthotropic graphene-matrix composite” by E. Jomehzadeh, A.R. Saidi, Z. Jomehzadeh, F. Bonaccorso, V.Palermo C. Galiotis and N.M. Pugno, Computational Materials Science, 99, 164-172, 2015 (doi. 10.1016/j.commatsci.2014.12.019)

“Stress Transfer Mechanisms at the Submicron Level for Graphene/Polymer Systems” by cont G., Androulidakis C., Koukaras E. N., Tsoukleri G., Polyzos I., Parthenios J., Papagelis K. and Galiotis C., ACS Applied Materials & Interfaces, 7/7, 4216-4223, 2015 (doi. 10.1021/am508482n)

“Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems” by A. C. Ferrari, F.Bonaccorso, V. Falko, K. S. Novoselov, S. Roche, P. Boggild, S. Borini, F. Koppens, V. Palermo, N.Pugno, J.A. Garrido, R. Sordan, A. Bianco, L. Ballerini, M. Prato, E. Lidorikis, J. Kivioja, C. Marinelli, T.Ryhänen, A.Morpurgo, J. N. Coleman, V. Nicolosi, L. Colombo, A. Fert, M. Garcia-Hernandez, A. Bachtold, G.F.Schneider, F. Guinea, C.Dekker, M. Barbone, C. Galiotis, A. Grigorenko, G. Konstantatos, A. Kis, M.Katsnelson, C. W. J. Beenakker, L.Vandersypen, A. Loiseau, V. Morandi, D. Neumaier, E. Treossi, V.Pellegrini, M. Polini, A. Tredicucci, G. M. Williams, B. H. Hong, J. H. Ahn, J. M. Kim, H. Zirath, B. J. vanWees, H. van der Zant, L. Occhipinti, A. Di Matteo, I. A. Kinloch, T. Seyller, E. Quesnel, X. Feng, K. Teo, N. Nanoscale, 7/11, 4598-4810, 2015 (doi. 10.1039/c4nr01600a)

“Experimentally derived axial stress–strain relations for two-dimensional materials such as monolayer graphene” by Ch.Androulidakis, G.Tsoukleri, N.Koutroumanis, G.Gkikas, P.Pappas, J.Parthenios, K.Papagelis and C. Galiotis, Carbon, 81, 322-328, 2015 (doi. 10.1016/j.carbon.2014.09.064)

“Curvature dependent surface energy for free standing monolayer graphene: Geometrical and material linearization with closed form solutions” by D. Sfyris, G.I. Sfyris and C. Galiotis, International Journal of Engineering Science, 85, 224-233, 2014 (doi. 10.1016/j.ijengsci.2014.08.007)

“Curvature dependent surface energy for a free standing monolayer graphene: Some closed form solutions of the non-linear theory” by D.Sfyris, G.I.Sfyris and C.Galiotis, International Journal of Non-Linear Mechanics, 67, 186-197, 2014 (doi. 10.1016/j.ijnonlinmec.2014.09.005)

“Failure Processes in Embedded Monolayer Graphene under Axial Compression” by Ch. Androulidakis, E.N.Koukaras, O.Frank, G. Tsoukleri, D.Sfyris, J.Parthenios, N.Pugno, K.Papagelis, K.S.Novoselov, and C.Galiotis, Scientific Reports (Nature), 4, 5271, 2014 (doi. 10.1038/srep05271)

“Improved power conversion efficiency by insertion of RGO–TiO2compositelayer as optical spacer in polymer bulk heterojunction solar cells” by G.D. Sharma, M.L. Keshtov, A.R. Khokh, D. Tasis and C. Galiotis, Organic Electronics, 15/2, 348-355, 2014 (doi. 10.1016/j.orgel.2013.11.027)

“Morphological and microstructural property comparison of bulk and aligned cvd-grown carbon nanotubes” by Mei H., Bai QL, Dassios K., Li Haiqing, Cheng LF, Galiotis C., Advanced Composites Letters, 23/1, 5-10, 2014 (doi. org/10.1177/096369351402300101) .

“Study of the thermal reduction of graphene oxide and of its application as electrocatalyst in quasi-solid state dye-sensitized solar cells in combination with PEDOT” by A. Nikolakooulou, D. Tasis, L. Sygellou, V. Dracopoulos, C. Galiotis and P. Lianos, Electrochimica Acta, 111, 698-706, 2013 (doi. 10.1016/j.electacta.2013.08.064 )

“Nonlinear softening and hardening nonlocal bending stiffness of an initially curved monolayer grapheme” by E. Jomehzadeh, M.K. Afhar, C.Galiotis, X.Shi, N.M. Pugno, International Journal of Non-Linear Mechanics, 56, 123-131, 2013 (doi. 10.1016/j.ijnonlinmec.2013.05.009)

“Assessing micromechanical behaviour of PET cord in rubber matrix composites by laser Raman microscopy” by M.G. Pastore Carbone, J. Parthenios, G. Tsoukleri, S. Cotugno, G. Mensitieri and C. Galiotis, Composites Science and Technology, 85, 104-110, 2013

“Raman Spectroscopy of grapheme at high pressure: Effects of the substrate and the pressure transmitting media” by k. Filintoglou, N. Papadopoulos, J. Arvanitidis, D. Christofilos, O.Frank, M. Kalbac, J. Parthenios, G.Kalosakas, C. Galiotis, K. Papagelis, Physical Review B, 88/4, 045418, 2013 (doi. 10.1103/PhysRevB.88.045418)

“The structural properties of chemically functionalized carbon nanotube thin films” by G.Trakakis, D. Tasis, J. Parthenios, C.Galiotis and K. Papagelis, Materials, 6/6, 2360-2371, 2013 (doi. 10.3390/ma6062360)

“In-plane force fields and elastic properties of grapheme” by G. Kalosakas, N.N. Lathiotiakis, C.Galiotis and K. Papagelis, Journal of Applied Physics, 113/3, 134307, 2013 (doi. 10.1063/1.4798384) 

“Open structured in comparison with dense multi-walled carbon nanotube-based buckypapers and their composites” by Trakakis G., Tasis D., Aggelopoulos C., Parthenios J., Galiotis C. and Papagelis K., Composites Science and Technology, 77, 52–59, 2013. 

“Efficient exfoliation of graphene sheets in binary solvents” by Tasis D., Papagelis K., Spiliopoulos P. and Galiotis C., Materials Letters, 94, 47–50, 2013 (doi.org/10.1016/j.matlet.2012.12.027) 

“Graphene production by dissociation of camphor molecules on nickel substrate” by Ravani F., Papagelis K., Drakopoulos V., Parthenios J., Dassios K., Siokou A.and Galiotis C., Thin Solid Films, 527, 31-37, 2013 (doi.org/10.1016/j.tsf.2012.12.029) 

“Buckypaper as Pt-free cathode electrode in photoactivated fuel cells” by Sfaelou S., Antoniadou M., Trakakis G.,Dracopoulos V., Tasis D.,Parthenios J., Galiotis C., Papagelis K.and Lianos P., Electrochimica Acta, 80, 399-404, 2012 (doi.org/10.1016/j.electacta.2012.07.046) 

“Polymer-nanotube interaction in MWCNT/poly(vinyl alcohol) composite mats” by Dassios K. G. and Galiotis C., Carbon, 50/ 11, 4291-4294, 2012 (doi.org/10.1016/j.carbon.2012.04.042) 

“Compressive behavior of MWCNT/epoxy composite mats” by Dassios K.G., Musso S.and Galiotis C., Composites science and technology, 72/9, 1027-1033, 2012 (doi.org/10.1016/j.compscitech.2012.03.016) 

“Phonon and Structural Changes in Deformed Bernal Stacked Bilayer Graphene” by Frank O., Bouša M., Riaz I., Jalil R., Novoselov K.S., Tsoukleri G., Parthenios J., Kavan L., Papagelis K., and Galiotis C., Nano Letters, 12/ 2, 687-693, 2012 (doi. 10.1021/nl203565p) 

“Surface refinement and electronic properties of graphene layers grown on copper substrate: An XPS, UPS and EELS study” by A.Siokou, F. Ravani, S. Karakalos, O. Frank, M. Kalbac and C. Galiotis, Applied Surface Science, 257/ 23, 9785-9790, 2011 (doi.org/10.1016/j.apsusc.2011.06.017) 

“Development of a universal stress sensor for graphene and carbon fibres” by O. Frank, G. Tsoukleri, I. Riaz, K. Papagelis, J. Parthenios, A.C. Ferrari, A.K. Geim, K. S. Novoselov and C. Galiotis, Nature Communications, 2/255, 2011 (doi. 10.1038/ncomms1247 ) 

“High-pressure Raman study of stacked-cup carbon nanofibers” by K. Papagelis, J. Arvanitidis, D. Christofilos, S. M. Souliou, C. Galiotis, S. Ves, and G.A. Kourouklis, High Pressure Research, 131-135, 31/1, 2011 (doi.org/10.1080/08957959.2010.531721) 

“Nanostructured Heteroarm Star Block Terpolymers via an Extension of the "In-Out'' Polymerization Route” by G. Linardatos, G. Tsoukleri, J. Parthenios C. Galiotis, O. Monticelli, S. Russo and C. Tsitsilianis, Macromolecular Rapid Communications, 371-377, 32/4, 2011 (doi.org/10.1002/marc.201000599)

“Raman 2D-Band Splitting in Graphene: Theory and Experiment” by O. Frank, M. Mohr, J. Maultzsch, C. Thomsen, I. Riaz, R. Jalil, K.S. Novoselov, G. Tsoukleri, J. Parthenios, K. Papagelis, L. Kavan and C. Galiotis, ACS Nano, 2231-2239, 5/3, 2011 (doi. 10.1021/nn103493g)

“Electrochemical oxidation of multi-wall carbon nanotubes” by G. Moraitis, Z. Spitalsky, F. Ravani, A. Siokou, C. Galiotis, Carbon, 2702-2708: 49/8, 2011.

“Compression Behavior of Single-Layer Graphenes” by Otakar Frank, Georgia Tsoukleri, John Parthenios, Konstantinos Papagelis, Ibtsam Riaz Rashid Jalil, Kostya S. Novoselov, and Costas Galiotis, ACS-Nano, 4/6, 3131–3138, 2010 (doi. 10.1021/nn100454w) 

“Dielectric Spectroscopy and Tunability of Multi-Walled Carbon Nanotube/Epoxy Resin Composites”, by Z. Spitalsky, S.N. Georga, C.A. Krontiras and C. Galiotis, Advanced Composites Letters, 19/6, 193-203, 2010 (doi.org/10.1177%2F096369351001900601) 

“Development and Testing of a self-deformed Composite Material” by G. Trakakis and C. Galiotis, Composite Structures, 92/2, 306-311, 2010 (doi.org/10.1016/j.compstruct.2009.08.001) 

“The effect of oxidation treatment on the properties of multi-walled carbon nanotube thin films” by Z. Spitalsky, C. Aggelopoulos, G. Tsoukleri, C. Tsakiroglou, J. Parthenios, S. Georga, C. Krontiras, D. Tasis, K. Papagelis and C. Galiotis, Materials Science and Engineering B-Advanced Functional Solid-State Materials, 165 (3), 135-138, 2009 (doi:10.1016/j.mseb.2009.09.019) 

"Effect of processing and loading conditions upon the fatigue behaviour of a C-f/ Epoxy laminate” by C. Koimtzoglou, K.G. Dassios, C. Galiotis, Advanced Composites Letters, 95-106:18/3, 2009. 

“Subjecting a Graphene Monolayer to Tension and Compression” by G. Tsoukleri, J. Parthenios, K. Papagelis, R. Jalil, A.C. Ferrari, A.K. Geim, K.S. Novoselov, and C. Galiotis, Small, 25/21, 2397-240, 2009 (doi.org/10.1002/smll.200900802) 

“High volume fraction carbon nanotube-epoxy composites”, by Ζ. Spitalsky, G. Tsoukleri, D. Tasis, C. Krontiras, S.N. Georga, C. Galiotis, Nanotechnology, 40/20, 405702, 2009 (doi.org/10.1088/0957-4484/20/40/405702) 

“Effect of fatigue on the interface integrity of unidirectional C-f-reinforced epoxy resin composites” by C. Koimtzoglou, K.G. Dassios and C. Galiotis, Acta Materialia, 57/9, 2800-2811, 2009 (doi:10.1016/j.actamat.2009.02.038) 

“Effect of oxidation treatment of multiwalled carbon nanotubes on the mechanical and electrical properties of their epoxy composites” by Z. Spitalsky, C.A. Krontiras, S.N. Georga, C. Galiotis, Composites Part A- Applied Science And Manufacturing, 40/6-7, 778-783, 2009. 

“Uniaxial strain in graphene by Raman spectroscopy: G peak splitting, Gruneisen parameters, and sample orientation” by T.M.G. Mohiuddin, A. Lombardo, R.R. Nair, A. Bonetti, G. Savini, R. Jalil, N. Bonini, D.M. Basko, C. Galiotis, N. Marzari, K.S. Novoselov, A.K. Geim, A.C. Ferrari, Physical Review B, 79/20, 205433, 2009. 

“Single-walled carbon nanotubes decorated with a pyrene-fluorenevinylene conjugate” by D. Tasis, J. Mikroyannidis, V. Karoutsos, C. Galiotis, K. Papagelis, Nanotechnology, 20/13, 135606, 2009. 

“Matrix cracking in polymeric composites laminates: Modelling and experiments” by D.T.G. Katerelos, M.Kashtalyan, C.Soutis, C.Galiotis, Composites Science & Technology, 68/12, 2310-2317, 2008. 

“Energy criterion for modelling damage evolution in cross-ply composite laminates” by D.T.G. Katerelos, J. Varna, C. Galiotis, Composites Science & Technology, 68/12, 2318-2324, 2008. 

“Chemical Oxidation of Multi Walled Carbon Nanotubes” by V. Datsyuk, M. Kalyva, K. Papagelis, J. Parthenios, D. Tasis, A. Siokou, I. Kallitsis and C. Galiotis, Carbon, 46/6, 833-840, 2008. 

“Accelerated environmental ageing study of polyester/glass fiber reinforced composites (GFRPCs)” by D.E. Mouzakis, H. Zoga and C. Galiotis, Composites Part B: Engineering, 39/3, 467-475, 2008 

“Thermal stress development in fibrous composites” by G. Anagnostopoulos, J. Parthenios and C. Galiotis, Materials Letters, 62/3, 341-345, 2008. 

“Oxidized Multi-Walled Carbon Nanotube Film Fabrication and Characterization” by D. Kastanis, D. Tasis, K. Papagelis, J. Parthenios, C. Tsakiroglou and C. Galiotis, Advanced Composites Letters, 16/6, 243-248, 2007. 

“Covalently functionalized carbon nanotubes as macroinitiators for radical polymerization” by K. Papagelis, M. Kalyva, D. Tasis, I. Parthenios, A. Siokou, C. Galiotis, Physica Status Solidi B-Basic Solid State Physics, 244/11, 4046-4050, 2007 

“High pressure Raman study of the second-order vibrational modes of single- and double-walled carbon nanotubes” by K. Papagelis, K.S. Andrikopoulos, J. Arvanifidis, A. Christofilos, C. Galiotis, C. Takenobu, T. Iwasa, Y. Kataura, H. Ves, S. Kourouklis, G.A., Physica Status Solidi B-Basic State Physics, 244/11, 4069-4073, 2007 

“Growth of calcium carbonate on non-covalently modified carbon nanotubes” by D. Tasis, S. Pispas, C. Galiotis and N. Bouropoulos, Materials Letters, 61/28, 5044-5046, 2007 

“Water-solube carbon nanotubes by redox radical polymerization” by D. Tassis, K. Papagelis, M. Prato, I. Kallitsis and C. Galiotis, Macromolecular Rapid Communications, 28/15, 1553-1558, 2007 

“Transformation fatique and stress relaxation of shape memory alloy wires” by P. Pappas, D. Bollas, J. Parthenios, V. Dracopoulos and C. Galiotis, Smart Mater. Struct., 16/6, 2560-2570, 2007 

“Analysis of matrix cracking in GFRP laminates using Raman spectroscopy” by D.T.G. Katerelos, P. Lundmark, J. Varna and C. Galiotis, Composites Science & Technology, 67/9, 1946-1954, 2007 

“Stress generation by shape memory alloy wires embedded in polymer composites” by D. Bollas, P. Pappas, J. Parthenios and C. Galiotis, Acta Materialia, 55/16, 5489-5499, 2007 

“Phonon stress sensitivity for interface characterization of fibrous composites at various temperatures by G. Anagnostopoulos, J. Parthenios and C. Galiotis, Acta Materialia, 55/11, 3783-3793, 2007 

“Quantifying crystalline fraction within polymer spherulites” by K. Gatos, C. Minogianni and C. Galiotis, Macromolecules, 40, 786-789, 2007 

“Raman spectroscopy investigation of stiffness change and residual strains due to matrix cracking” by D.G. Katerelos, P. Lundmark, J. Varna and C. Galiotis., Mechanics of Composite Materials, 42/6, 535-546, 2006 

“Viscoplastic finite element analysis of matrix crack propagation in model continuous-carbon fibre/epoxy composites” by S. Sirivedin, D.N. Fenner, R.B. Nath and C. Galiotis, Composites Part A: Applied Science and Manufacturing, 137/11, 922-1935, 2006 

“Effects of inter-fibre spacing and matrix cracks on stres amplification factors in carbon-fibre/epoxy matrix composites, Part II: Hexagonal array of fibres” by S. Sirivedin, D.N. Fenner, R.B. Nath and C. Galiotis, Composites Part A: Applied Science and Manufacturing, 37/ 11, 1936-1943, 2006

“Growth of calcium phosphate mineral on carbon nanotube buckypapers” by D. Tasis, D. Kastanis, C. Galiotis, and N. Bouropoulos, Phys. Stat. Sol. (b), 243/13, 3230-3233, 2006

“Effect of Off – Axis Matrix Cracking on Stiffness of Symmetric Angle-Ply Composite Laminates” by D.G. Katerelos, L.N. McCartney and C. Galiotis, International Journal of Fracture, 139, 529-536:, 2006 

“Direct measurement of fiber bridging in notched glass-ceramic-matrix composites” by K.G. Dassios and C. Galiotis, Journal of Materials Research, 21/5, 1150-1160, 2006

“Effect of Stress and Temperature on the Optical Phonons of Aramid Fibers” by D. Bollas, J. Parthenios and C. Galiotis, Physical Review B, 73, 094103, 2006

“Enhancing the Damping of Wind turbine Rotor Blades, the Damblade Project” by P.K. Chaviaropoulos, E.S. Politis, D.J. Lekou, N.N. Sorensen, M.H. Hansen, B.H. Bulder, D. Winkelaar, C. Lindenburg, D.A. Saravanos, T.P. Philippidis, C. Galiotis, M.O.L. Hansen and T. Kossivas, Wind Energy, 9, 163-177, 2006

“Design and construction of a vehicular bridge made of glass/polyester pultruded box beams”, by V. Kostopoulos, Y.P. Markopoulos, D.E. Vlachos, D. Katerelos, C. Galiotis, T. Tsiknias, D. Zacharopoulos, D. Karalekas, P. Chronis, D. Kalomallos, Plastics Rubber and Composites, 34/4, 201-207, 2005

“Global method for measuring stress in polymer fibers at elevated temperatures” by G. Anagnostopoulos, A.G. Andreopoulos, J. Parthenios, C. Galiotis, Applied Physics Letters, 87/13, 131910-2, 2005

“Experimental Determination of Stress Concentrations in Composite Laminates and their Effects on Damage Evolution” by D.G. Katerelos and C. Galiotis, Applied Mechanics and Materials, 5-6, 383-390, 2005 

“Estimation of crystallinity in isotropic isotactic polypropylene with Raman spectroscopy” by C. Minogianni, K.G. Gatos, C. Galiotis, Applied Spectroscopy, 59/9, 1141-1147, 2005 

“An experimental and theoretical study of the stress transfer problem in fibrous composites”, by G. Anagnostopoulos, J. Parthenios, A.G. Andreopoulos and C. Galiotis, Acta Materialia, 53/15, 4173-4183, 2005

“Local strain re-distribution and stiffness degradation in cross-ply polymer composites under tension” by D.G. Katerelos, L.N. McCartney and C. Galiotis, Acta Materialia, 53/12, 3335-3343, 2005 

“Determination of interface integrity in high volume fraction polymer composites at all strain levels” by G. Anagnostopoulos, D. Bollas, J. Parthenios, G.C. Psarras and C. Galiotis, Acta Materialia, 53/3, 647-657, 2005 

“Axial strain redistribution resulting from off-axis ply cracking in polymer composites” by D.G. Katerelos and C. Galiotis, Applied Physics Letters, 85/17, 3752-3754, 2004 

“Fluorescence Studies of Polycrystalline Al2O3 Composite Constituents: Piezo-Spectroscopic Calibration and Applications” by K.G. Dassios and C. Galiotis, Applied Physics A79, 647-659, 2004

“Mechanically and thermally induced chain conformational transformations between helical form I and trans-planar form III in syndiotactic polypropylene using FT-IR and Raman spectroscopic techniques” by K.G. Gatos, G. Kandilioti, C. Galiotis and V.G. Gregoriou, Polymer, 45/13, 4453-4464, 2004 

“Compressive failure mechanisms in multi-fibre microcomposites”, by S. Goutianos, C. Galiotis, T. Peijs, Composites-Part A, 35/4, 461-475, 2004

“Mechanisms of stress transfer and interface integrity in carbon/epoxy composites under compression loading. Part II: Numerical approach” by S. Goutianos, T. Peijs and C. Galiotis, Int. J. Solids & Structures, 40/21, 5521-5538, 2003

“Stress and temperature self-sensing fibres” by G.C. Psarras, J. Parthenios, D. Bollas and C. Galiotis, Chem. Phys. Lett. 367, 270-277,2003

“Effects of inter-fibre spacing and matrix cracks on stress-amplification factors in carbon-fibre/epoxy matrix composites, Part 1: Planar array of fibres” by S. Sirivedin, D.N. Fenner, R.B. Nath, C. Galiotis, Composites- Part A, 34, 1227-1234, 2003

"Direct In Situ Measurements of Bridging Stresses in CFCCs", by K.G. Dassios, C. Galiotis, V. Kostopoulos and M. Steen, Acta Materialia, 51/18, 5359-5373, 2003 

“Stress Transfer Efficiency in Model Composites under Dynamic Loading” by C. Koimtzoglou, V. Kostopoulos and C. Galiotis, Applied Physics-A, 76/2, 231-239, 2003 

“Progress in Composites with Embedded Shape Memory Alloy Wires” by J. Schrooten, V. Michaud, J. Parthenios, G.C. Psarras, C. Galiotis, R. Gotthardt, J.A. Manson and J. Van Humbeeck, Materials Transactions (The Japan Institute of Metals), 43/5, 961-973, 2002

“Aramid Fibers; a Multifunctional Sensor for Monitoring Stress/ Strain Fields and Damage Development in Composite Materials” by J. Parthenios, D.G. Katerelos, G.C. Psarras and C. Galiotis, Engineering Fracture Mechanics, 69, 1067-1087, 2002

“Mechanisms of stress transfer and interface Integrity in Carbon/ Epoxy Composites under Tension and Compression Loading. Part 1: Experimental Investigation” by S. Goutianos, T. Peijs and C. Galiotis, Int. J. Solids & Structures, 39/12, 3217-3231, 2002

“Comparative Assessment of Stress Transfer Efficience in Tension and Compression” by S. Goutianos, T. Peijs, C. Galiotis, Compos.Part A-Appl. S., 33, 1303-1309, 2002

“Adaptive Composites Incorporating Shape Memory Alloy Wires; Part 2: Development of internal recovery stresses as a function of activation temperature” by J. Pathenios, G.C. Psarras and C. Galiotis, Composites-Part A, 32/12, 1735-1747, 2001

“Detailed Atomistic Molecular Dynamics Simulation of the Orthorombic Phase of Crystalline Polyethylene with the COMPASS Force Field” by I-E Mavrantzas, D. Prentzas, V.G. Mavrantzas, and C. Galiotis, Journal of Chemical Physics, 115/8, 3937-3950, 2001

“Adaptive Composites Incorporating Shape Memory Alloy Wires; Part 1: Probing the internal stress and temperature distributions with a laser Raman sensor” by G.C. Psarras, J. Pathenios and C. Galiotis, Journal of Materials Science, 36, 535-546, 2001

“Modelling the Stress Transfer Efficiency in Carbon/ Epoxy Composites”, by A. Paipetis and C. Galiotis, RSC Proc. Royal Soc. 457, A 1555-1577, 2001 

“Micromechanics of Reinforcement and Damage Initiation in Carbon Fibre/ Epoxy Composites under Fatigue Loading” by C. Koimtzoglou, V.Kostopoulos and C. Galiotis, Composites Part A, 32, 457-471, 2001 

“Matrix Crack Propagation Criteria for Model Short Carbon Fibre-Epoxy Composites” by S. Sirivedin, D.N. Fenner, R.B. Nath and C. Galiotis, Composite Science & Technology, 60/15, 2835-2847, 2000 

“The progressional approach to interfacial failure in carbon reinforced composites: elasto-plastc finite element modelling of interface cracks”, by R.B. Nath, D.N. Fenner and C. Galiotis, Composites-Part A, 31, 929-943, 2000 

“Measurement and Modeling of the Stress Concentration at a Circular Notch in Composite Materials” by B.P. Arjyal, D.G. Katerelos, C. Filiou and C. Galiotis, Journal of Experimental Mechanics, 40/3, 248-256, 2000 

“Determination of Molecular Changes in Soft Tissues Under Strain Using Laser Raman Microscopy’, by Y-N. Wang, C. Galiotis and D.L. Bader, Journal of Biomechanics, 33, 483-487, 2000 

“Unification of Fibre/ Matrix Interfacial Measurements with Laser Raman Spectroscopy”, by C. Galiotis, A. Paipetis and C. Marston, J. Raman Spectroscopy, 30/10, 899-912, 1999 

“In-Situ Monitoring of the Fibre Strain Distribution in Carbon Fibre Thermoplastic Composites Using Laser Raman Spectroscopy; Part 1- Effect of Applied Tensile Stress” by C. Filiou and C. Galiotis, Composites Science & Technology, 59/14, 2149-2161, 1999

“Surface and Bulk Stress/Strain Measurements in Composite Laminates with a Fibre Optic Raman Probe” by B.P. Arjyal, P.A. Tarantili, A.G. Andreopoulos and C. Galiotis, Composites, 30/10, 1187-1195, 1999 

“Stress Transfer from the Matrix to the Fibre in a Fragmentation Test: Raman Experiments and Analytical Modeling” by A. Paipetis, Y-C Liu, C. Galiotis and J. A. Nairn, Journal of Composite Materials, 33/4, 377-399, 1999. 

“On the Failure of Unidirectional Carbon-Epoxy Composites- Part 1: The Effect of Fibre Sizing upon Filament Fracture and Damage Evolution”, by C. Marston and C. Galiotis, Journal of Materials Science, 33, 5311-5325, 1998 

“Real-Time Micro-Raman Measurements on Stressed Polyethylene Fibres. Part 1- Strain rate effects and molecular stress redistribution” by P.A. Tarantili, A.G. Andreopoulos and C. Galiotis, Macromolecules, 31/20, 6954-6976, 1998 

“Residual Strain and Young’s Modulus Determination in Cross-Ply Composites with an Embedded Aramid Fibre Strain Sensor”, by B.P. Arjyal, C. Galiotis, S. L. Ogin and R.D. Whattingham, Composites Part A, 29/11, 1363-1369, 1998 

“Monitoring Local Strain Magnification in Cross-Ply Composites with an Embedded Aramid Fibre Strain Sensor”, by B.P. Arjyal, C. Galiotis, S. L. Ogin and R.D. Whattingham, Journal of Materials Science, 33/11, 2745-2750, 1998 

"Definition and Measurement of the Shear-Lag Parameter Beta as an Index of the Stress Transfer Efficiency in Polymer Composites” by C. Galiotis and A. Paipetis, Journal of Materials Science, 33/5, 1137-1143, 1998

“Application of Composites to Civil Engineering Structures; Shear and Bending of Beam-to-Column Composite Sections” by E. Gutierrez, G. Verzeletti and C. Galiotis, Advanced Composites Letters, 6/2, 47-52, 1997 

“Raman Vibrational Studies of Atactic and Syndiotactic Polystyrene- Part 2: Use of the ν1 Fundamental Vibrational Mode as a Quantitative Measure of Crystallinity within Isotropic Materials” by E.J.C. Kellar, A. Evans, C. Galiotis and E.H. Andrews, Macromolecules, 30/ 8, 2400-2407, 1997 

“Effects of Interface, Volume Fraction and Geometry upon Stress Re-Distribution in Polymer Composites under Tension” by V. Chohan and C. Galiotis, Composites Science and Technology, 57/8, 1089-1101, 1997 

“Measurement of Stress Concentration around Fibre Breaks in Carbon/ Epoxy Resin Composite Tows” by C. Marston, B. Gabbitas, J. Adams, S. Nutt, P. Marshall and C. Galiotis, Composite Science and Technology, 57/8, 913-923, 1997 

“The Structure and Morphology of Syndiotactic Polystyrene Injection Moulded Coupons” by A. M. Evans, E.J.C. Kellar, J. Knowles, C. Galiotis and E.H. Andrews, Pol. Science & Eng., 37/1, 153-165, 1997 

“A Study of the Stress-Transfer Characteristics in Model Composites as a Function of Material Processing, Fibre Sizing and Temperature of the Environment” by A. Paipetis and C. Galiotis, Composite Science and Technology, 57/8, 827-838, 1997 

“Fibre-Matrix Mechanical Interaction in Carbon Fibre/Bismaleimide Model Composites”, by J.P. Favre, M. H. Auvray, P. CheneauHenry, C. Galiotis, C. Vlattas, A. Paipetis, M. Pegorano, F. Severini, L. DiLandro and L. J. Yuan, Polymer Composites, 937-947 17/6, 1996 

“Failure Characteristics in Carbon Epoxy Composite Tows” by C. Marston, B. Gabbitas, J. Adams, S. Nutt, P. Marshall and C. Galiotis, Composites, 27A/12, 1183-1194, 1996 

“Measurement of Strain Distribution in Fibre Reinforced Ceramic Matrix Composites” by F. Bollet, C. Galiotis and M. J. Reece, Composites, 27A, 729-735, 1996 

“Effect of fibre Sizing on the Stress Transfer efficiency in carbon/epoxy model composite/Epoxy Composites by A. Paipetis and C. Galiotis, Composites, 27A, 755-767, 1996

“Interfacial Measurements and Fracture Characteristics of 2D Microcomposites Using Remote Laser Raman Microscopy” by V. Chohan and C. Galiotis, Composites, 27A, 881-888, 1996 

“Elasto-Plastic Finite Element Modelling of Interfacial Failure in Model Kevlar 49 Fibre/Epoxy Composites” by R.B. Nath, D.N. Fenner and C. Galiotis, Composites, 27A, 821-832, 1996 

“Finite Element Mocdelling of Interfacial Failure in Model Carbon Fibre-Epoxy Composites” by R.B. Nath, D.N. Fenner and C. Galiotis, Journal of Materials Science, 31, 2879-2883, 1996 

“Stress-Strain Measurements in Advanced Composites Using Remote Laser Raman Microscopy” by B. Ajyal, A. Paipetis and C. Galiotis, Non-Destructive Testing and Evaluation, 12, 355-366, 1996 

“Characterisation of PAN-based Carbon Fibres with Laser Raman Spectroscopy. Part 1: Effect of Processing Variables on Raman Band Profiles” by N. Melanitis, P.L. Tetlow and C. Galiotis, Journal of Materials Science, 31, 851-860, 1996 

“Remote Laser Raman Microscopy (ReRaM); Part 1 Design and Testing of a Confocal Microprobe” by A. Paipetis, C. Vlattas and C. Galiotis, Journal of Raman Spectroscopy, 27, 519-526, 1996 

“Raman Vibrational Studies of Atactic and Syndiotactic Polystyrene- Part 1: Assignment of a conformation/ crystallinity sensitive spectral region” by E.J.C. Kellar, C. Galiotis and E.H. Andrews, Macromolecules, 29, 3515-3520, 1996 

"Analysis of Stress Transfer from the Matrix to the Fiber Through an Imperfect Interface: Application to Raman data and Single-Fiber Fragmentation Test”, by J. Nairn, Y-C Liu and C. Galiotis, ASTM-STP 1290, eds. J.C. Spragg and L.T. Drzal, American Society for Testing and Materials, 47-65, 1996 

"Interfacial Measurements in Single and Multi-fibre Composites Using the Technique of Laser Raman Spectroscopy" by C. Galiotis, V. Chohan, A. Paipetis and C. Vlattas, ASTM-STP 1290, eds. J.C. Spragg and L.T. Drzal, American Society for Testing and Materials, 19-33, 1996 

“Localised Stress Measurements in Composite Laminates Using a Raman Stress Sensor, by B. Ajyal, and C. Galiotis, Advanced Composite Letters, 4/2, 47-52, 1995 

“Determination of Stress Distribution in Fibre Bridged Cracks in Ceramic Matrix Composites” by F. Bollet, C. Galiotis and M. J. Reece, Advanced Composites Letters, 3/4, 127-131, 1994 

“Compressional Behaviour of Carbon Fibres. Part 2: Modulus Softening” by N. Melanitis, P. L. Tetlow, C. Galiotis and S.S. Smith, Journal of Materials Science, 29, 786-799, 1994 

“Modelling of Stress Transfer in Fibre Composites” by F.J. Guild, C. Vlattas and C. Galiotis, Composites Science & Technology, 50, 319-332, 1994

“Environmental Degradation Studies of the Interface in Single-Filament Graphite/ Epoxy Composites Using Laser Raman Spectroscopy” by M.S. Amer, M.J. Koczak, C. Galiotis, L.S. Schadler, Advanced Composites Letters, 3/1, 17-20, 1994

“Deformation Behaviour of Liquid Crystal Polymer fibres: Part 1. Converting spectroscopic data into mechanical stress-strain curves in tension and compression” by C. Vlattas and C. Galiotis, Polymer, 35/11, 2335-2347, 1994 

“Monitoring the Micromechanics of Reinforcement in Carbon fibre/ epoxy resin systems” by N. Melanitis, C. Galiotis, P. L. Tetlow and C.K.L. Davies, Journal of Materials Science, 28, 1648-1654, 1993 

“Interfacial Shear Stress Distribution in Model Composites; Part 3, The Effect of Fibre Modulus”, by C. Galiotis, P.L. Tetlow and C.K.L. Davies, Composites, 24/6, 459-466, 1993 

“Stress-Transfer Characteristics in Model Composites” by C. Galiotis, Composite Interfaces, 1/4, 321-336, 1993 

“A Study of Mechanisms of Stress-Transfer in Continuous and Discontinuous Fibre Model Composites Using Laser Raman Spectroscopy” by, C. Galiotis, Composites Science & Technology, 48, 15-28:, 1993 

“Strain Mapping in Aramid/ Epoxy Microcomposites” by K. M. Atallah and C. Galiotis, Composites, 24/8, 635-642, 1993 

“Interfacial Micromechanics Using Laser Raman Spectroscopy” by N. Melanitis and C. Galiotis, Proc. of Royal Soc.-A, 440, 379-398, 1993

“Residual Stress Distribution in Carbon Fibre/ Thermoplastic Matrix Pre-impregnated Composite Tapes” by C.D. Filiou, C. Galiotis and D.N. Batchelder, Composites, 28/1, 28-37, 1992 

“Interfacial Studies on Carbon/ Thermoplastic Model Composites Using Laser Raman Spectroscopy” by L.S. Schadler, N. Melanitis, C. Galiotis, J.C. Figueroa and C. Laird, J. Mater. Sci., 27/6, 1663-1671, 1992 

“Interfacial Shear Stress Distribution in Model Composites; Part 2, Fragmentation studies on Carbon Fibre/ Epoxy system”" by N. Melanitis, C. Galiotis, P. L. Tetlow and C.K.L. Davies, Journal of Composite Materials, 26, 574-610, 1992 

“Phase Transformation around Indentations in Zirconia” by M.J. Reece, P.L. Tetlow and C. Galiotis, Journal Materials Science-Letters, 11, 575-577, 1992 

“Interfacial Shear Stress Distribution in Model Composites; Part 1, A Kevlar 49 fibre in an Epoxy Matrix” by H. Jahankhani and C. Galiotis, Journal of Composite Materials, 25, 609-631, 1991 

“The study of Model Polydiacetylene/ Epoxy Composites; Part 3. The Effect of Volume Fraction” by I.M. Robinson, C. Galiotis, D.N. Batchelder and R.J. Young, Journal of Materials Science, 26/9, 2293-2299, 1991

“Monitoring the Behaviour of Polymer Fibres under Axial Compression” by C. Vlattas and C. Galiotis, Polymer, 32/10, 1788-1793, 1991 

“Interfacial Studies on Model Composites Using Laser Raman Spectroscopy” by C. Galiotis, Composites Science and Technology, 42, 125-150, 1991 

“Compressional Behaviour of Carbon Fibres: Part 1; A Raman Spectroscopic Study” by N. Melanitis and C. Galiotis, Journal of Materials Science, 25/12, 5081-5090, 1990

“Strain Dependences of the First and Second Order Raman Spectra of Carbon Fibres”, by C. Galiotis and D. N. Batchelder, Journal of Materials Science- Letters, 7, 545-547, 1988 

“Residual Strain Mapping in Carbon Fibre/PEEK Composites” by C. Galiotis, N. Melanitis, D. N. Batchelder, I. M. Robinson and J. A. Peacock, Composites, 4, 321-324, 1988 

“Chain Stretching in Aramid Fibres” by S. Van der Zwaag, M. G. Northolt, R. J. Young, I. M. Robinson, C. Galiotis and D. N. Batchelder, Polymer Communications, 28, 276-277, 1987 

“The Study of Model Polydiacetylene/Epoxy Composites Part 2”, by I.M. Robinson, R.J. Young, C. Galiotis and D. N. Batchelder, Journal of Materials Science, 22, 3642-3646, 1987 

“Strain Dependence of the Raman Frequencies for Different Types of Carbon Fibres”, by I. M. Robinson, M. Zakhikani, R. J. Day,R. J. Young and C. Galiotis, Journal of Materials Science-Letters, 6, 1212-1214, 1987 

“Stress Induced Twinning of Polydiacetylene Single Crystal Fibres in Composites” by I. M. Robinson, P. H. Yeung, C. Galiotis, R. J. Young and D. N. Batchelder, Journal of Materials Science, 21, 3440-3444, 1986 

“Strain Dependence of the Raman Frequencies of a Kevlar 49 Fibre” by C. Galiotis, I.M. Robinson, R.J. Young, B.J.E. Smith and D.N. Batchelder, Polymer Communications, 26, 354-355, 1985 

“High Modulus Polydiacetylene Single Crystal Fibres” by C. Galiotis, R. T. Read, P. H. J. Yeung and R. J. Young, Journal of Polymer Science: Polymer Physics Edition, 22, 1589-1606, 1984

“The Study of Model Polydiacetylene/Epoxy Composites, Part 1. The Axial Strain in the Fibre” by C. Galiotis, R. J. Young, P. H. Yeung and D. N. Batchelder, Journal of Materials Science, 19, 3640-3648, 1984

“A Resonance Raman Spectroscopic Study of the Strength of the Bonding Between an Epoxy Resin and a Polydiacetylene Fibre” by C. Galiotis, R.J. Young and D.N. Batchelder, Journal of Materials Science- Letters, 2, 263-266, 1983 

“Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part III: Mechanical Properties” by C. Galiotis, R.J. Young, Polymer, 24, 1023-1030 1983 

“Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part II: Resonant Raman Spectroscopy” by C. Galiotis, R.J. Young and D.N. Batchelder, Journal of Polymer Science: Polymer Physics Edition, 21/12, 2483-2494, 1983 

“Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part I: Crystal Modification and Polymerisation Kinetics” by C. Galiotis, R.J. Young, D.J. Ando and D. Bloor, Macromolekulare Chemie, 184, 1083-1095, 1983