Events

Publications

Publications (4)

Publications in Books

  1. “Stress/Strain Measurements in Fibers and Composites Using Raman Spectroscopy” by Costas Galiotis, John Parthenios, V.G. Gregoriou and M. Braiman, Taylor & Francis Co, New York, NY  pp.35-98, (2005)
  2. “Interfacial damage modelling of composites”, by C.Galiotis and A. Paipetis, in “Multi-Scale Modelling of Composite Materials” ed. by C. Soutis and P. Beaumont, Woodhead Publishing Ltd., pp. 33-64 (2005)
  3. “The effect of interface on the fatigue performance of fibre composites, in Fatigue in Composite Materials: A Review of the Science and Technology of the Fatigue Response of Fibre-Reinforced Plastics”, by Galiotis C. and Koimtzoglou C., Ed. B. Harris, Woodhead Publishing Ltd., October 2003
  4. In Situ Assessment of the Micromechanics of Large Scale Bridging in Ceramic Composites, in Recent Advances in Composite Materials”, ed. by K. G. Dassios, C. Galiotis, V. Kostopoulos and M. Steen publ. by Kluwer Academic Publishers USA, (2003)
  5. “Strain Redistribution in Composite Laminates resulting from off  axis ply cracking” by D. G. Katerelos, J. Parthenios and C. Galiotis, in “Recent Advances in Composite Materials ”, Ed. E.E. Gdoutos and Z. Margioli  Riga, Kluwer Academic Publ., USA (2003), 139-150
  6. Micromechanics of Reinforcement using Laser Raman Spectroscopy” by C. Galiotis in “Microstructural Characterisation of Fibre-Reinforced Composites” ed. by J.Summerscales, publ. by Woodhead Publishing Ltd., Cambridge, England (1998), 224-253
  7. "The Mechanical Properties of Polypyrrole Plates" by D. Bloor, R. D. Hercliffe, C. Galiotis and R. J. Young, in "Electronic Properties of Polymers and Related Compounds", Springer Series in Solid-State Sciences, 63 (1985), p.179, edited by H. Kuzmany, A. Metring and R. S. Roth
Read more...

Publications in Conference Proceedings

In Refereed Proceedings

  1. “Raman Spectroscopy Investigation of Stiffness Change and Residual Strains due to Matrix Cracking” by P. Lundmark, D. G. Katerelos, J. Varna and C. Galiotis, Mechanics of Composite Materials MCM-2006 XIV International Conference, Riga, Latvia, 29 May – 2 June, 2006
  2. “Raman Spectroscopy Assessment of Stiffness Reduction and Residual Strains due to Matrix Cracking in Angle – Ply Laminates” by P. Lundmark, D. G. Katerelos, J. Varna and C. Galiotis, Proceedings of the 16th European Conference on Fracture, July 3 – 7, 2006, Alexandroupolis, Greece
  3. An experimental and theoretical study of the stress transfer mechanism in fibrous composites” by  Anagnostopoulos G., Parthenios J. and Galiotis C., Proceedings of extended abstracts of International Conference on Interfaces & Interphases in Multicomponent Materials, pages 179-180, September 12-14, (2005), Centre Culturel Villeurbanne - Lyon, France
  4. A new methodology for measuring stress in polymer fibres through interface interactions at elevated temperatures”, by Anagnostopoulos G., Parthenios J. and Galiotis C., Proceedings of  extended abstracts International Conference on Interfaces & Interphases in Multicomponent Materials, pages 185-186, September 12-14, (2005), Centre Culturel Villeurbanne - Lyon, France
  5. Smart Composites Incorporating Shape Memory Alloy Wires: Stress Transmission Through the Wire/ Polymer Interface”, by D. Bollas,  J. Parthenios and C. Galiotis, Proceedings of International Conference on Interfaces & Interphases in Multicomponent Materials, p. 207 September 12-14, (2005), Centre Culturel Villeurbanne - Lyon, France
  6. Evaluation of Energy Dissipation Mechanisms in Continuous-Fibre Reinforced Composites via Direct In Situ Measurements in the Microscale”, by K.G. Dassios and C. Galiotis, Proceedings of Advancing with Composites 2005 / International Meeting on Composites Materials,  October 11-14, 2005, Naples, Italy, pages 153
  7. “Design and construction of a vehicular bridge made of glass/polyester    pultruded box beams” by Kostopoulos, V,   Markopoulos, YP,  Vlachos, DE,    Katerelos, D., Galiotis, C  Tsiknias, T, Zacharopoulos, D, Karalekas, D, Chronis, P, Kalomallos, D., 9th International PVC Conference,   Brighton, U.K., April  26-28, 2005  MANEY PUBLISHING, ISBN 1465-8011
  8. Investigation of stress transfer mechanisms in fibre reinforced composites under tension and compression”, by Anagnostopoulos G., Koimtzoglou C., Bollas D., Goutianos S., Parthenios J., Psarras G. C. and Galiotis C., Proceedings of COMP 2003 5th Intern. Symposium on Advanced Composites, Session: Joints and Interfaces, May 5-7, (2003), Corfu, Greece
  9. Effect of mechanical and thermal load on the raman spectra of aramid fibres”, by D. Bollas, J. Parthenios, G. C. Psarras and C. Galiotis, 15th European Symposium on Polymer Spectroscopy , Hersonissos, Crete, Greece, June 8-12 2003
  10.  “Monitoring Local Strains and Stiffness Degradation in Cracked Cross – Ply Composites” by D. G. Katerelos, L. N. McCartney and C. Galiotis, Proceedings of COMP ’03: Advances in Composite Technology, May 5 – 7, 2003, Corfu, Greece, Transfer and Business Partnership Event, 2004 , Thessaloniki, Greece , ed D. Van Hemelrijck, A. Anastasopoulos, N.E. Melanitis , 2004 Swets & Zeitlinger, Lisse , 67 -72 , ISBN: 90 5809 645 9
  11. "Interfacial Shear Stress Monitoring in Model Composites" by C. Vlattas, H. Jahankhani and C. Galiotis in "Advanced Composites in Emerging Technologies", ed. S. A. Paipetis and T. P. Philippidis, Amatec Publications, Patras, Greece (1992), 460-469
  12. "Non-Destructive Testing by Laser Raman Spectroscopy" by C. Galiotis in "Advanced Composites in Emerging Technologies", ed. S. A. Paipetis and T. P. Philippidis, Amatec Publications, Patras, Greece (1992), 324-334
  13. "Testing Carbon Fibres in Compression" by N. Melanitis, P.L. Tetlow, C. Galiotis and C. K. L Davies in "Advanced Composites in Emerging Technologies", ed. S. A. Paipetis and T. P. Philippidis, Amatec Publications, Patras, Greece (1992), 196-203
  14. "Characterisation of Aramid Fibres and Examinations of Aramid-Epoxy Interfaces" using Laser Raman Specroscopy" by H. Jahankhani and C. Galiotis in "Phase Interactions in Composite Materials", edited by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1992), 406-416
  15. "Strain Dependences of the Raman Spectra of Carbon Fibres and Residual Strain Mapping in Composites" by N. Melanitis, C. Galiotis and D. N. Batchelder in "Phase Interactions in Composite Materials", edited  by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1992), 417-427
  16. "Raman Optomechancal Studies on Fibres, Composites and Fibre-Matrix Interfaces" by C. Galiotis in "Phase Interactions in Composite Materials", edited  by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1992), 173-184
  17. "A New Technique for Assessing the Compressive Behaviour of Single Filaments" by C. Galiotis, N. Melanitis and H. Jahankhani, Proceedings of the IMechE, FRC'90, Fibre Reinforced Composites, 27-29 March 1990, University of Liverpool, 81-87
  18. "Polydiacetylene Single Crystal Fibres and Composites" by R. J. Young, C. Galiotis, I. M. Robinson and D. N. Batchelder, "Engineering Applications of New Composites", edited by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1988), 49-56
  19. "Strain Measurements in Aramid Fibre and Composites Using Raman Spectroscopy" by C. Galiotis, I. M. Robinson, D. N. Batchelder and R. J. Young, "Engineering Applications of New Composites", edited by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1988), 409-420

 

In Non-Refereed Proceedings

  1. "Processing of high volume fraction epoxy composites reinforced by carbon nanotubes" by D.Tasis, D.Kastanis, Z.Spitalsky, K.Papagelis, J. Parthenios, C.Galiotis, 3rd International symposium on Nanostructured and Functional Polymer-Based Materials and Nanocomposites, May 13-15, (2007), Corfu (Greece)
  2. Chemical Oxidation of Multi Walled Carbon Nanotubes” by M. Kalyva, V. Datsuyk, K.Papagelis, J.Parthenios, A.Siokou, I. Kallitsis, C.Galiotis, 3rd International symposium on Nanostructured and Functional Polymer-Based Materials and Nanocomposites, May 13-15 (2007), Corfu, Greece
  3. Production and Mechanical behavior of high volume fraction epoxy nanocomposites based on functionalized carbon nanotubes as reinforcements” by D.Kastanis, J.Parthenios, K.Papagelis, 3rd International symposium on Nanostructured and Functional Polymer-Based Materials and Nanocomposites, May 13-15 (2007), Corfu, Greece
  4. Characterisation of carbonaceous materials at nono-level using laser raman spectroscopy”, Melanitis Nickos, C.Galiotis, 3rd International symposium on Nanostructured and Functional Polymer-Based Materials and Nanocomposites, May 13-15 (2007), Corfu, Greece
  5. “In situ characterization of stress transfer efficiency in full polymer composites at all temperatures” by Anagnostopoulos G., Parthenios J. and Galiotis C., Proceedings of COMP 2007 6th International Symposium on Advanced Composites Session 1: Mechanical Properties, May 16-18, (2007), Corfu, Greece
  6. “Production and Mechanical Behavior of High Volume Fraction Epoxy Nanocomposites based on Carbon Nanotubes as reinforcements”  by D. Kastanis, J. Parthenios, K. Papagelis, C.Galiotis, EUROMAT 2007, Nuremberg, Germany, 10-13 September 2007
  7. Estimating the interface integrity in fibrous composites at all temperatures by G. Anagnostopoulos, J. Parthenios, C. Galiotis, Proceedings of 12th European Conference on Composite Materials, Session: Interface I, p.59, August 29 – September 1, (2006), Biarritz, France
  8. Micro-scale distribution in adaptive composite systems by D. Bollas, J. Parthenios and C. Galiotis, Proceedings of 12th European Conference on Composite Materials, Session: Functional Composites I, August 29 – September 1, (2006), Biarritz, France
  9. “A Meso-scopic Experimental Determination of Matrix Damage Effects in Composite Laminates” by D. G. Katerelos, P. Lundmark, J. Varna, L. N. McCartney and C. Galiotis, Proceedings of 12th European Conference on Composite Materials, Session: Damage/Fracture II, August 29 – September 1, (2006), Biarritz, France
  10. Micro- and Macro-Scale Investigation of the “Morphing” Capability of Hybrid Systems” by D. Bollas, P. Pappas,  J. Parthenios and C. Galiotis, Int. Conf. on Micromechanics and Microstructure Evolution. Madrid, September 12-16, 2005
  11. Fatigue and Activation Stress Degradation of Nickel-Titanium Shape Memory Alloy Wires”, by P. Pappas, D. Bollas, J. Parthenios and C. Galiotis  Madrid, Spain, 12-15 September 2005
  12. Non-Destructive Study of Thermal Dissipation in Shape Memory Alloy Hybrid Composite Systems” by D. Bollas, J. Parthenios, and C. Galiotis, ECCM11, Rhodes Greece 2004, May 31- June 3, ISBN: 960-7839-03-X
  13. A novel technique for the determination of interface integrity in high volume fraction polymer composites” by G. Anagnostopoulos, J. Parthenios, A. G. Andreopoulos  and C. Galiotis, ECCM11, Rhodes Greece 2004, May 31- June 3. ISBN: 960-7839-03-X
  14. Assessment of Crack Shielding in Ceramic Matrix Composites in the Presence of Large Scale Effects”, by K.G. Dassios, V. Kostopoulos and C. Galiotis and M. Steen, Proceedings of the 11th European Conference on Composite Materials, May 31-June 3, 2004, Rhodes, Greece, ISBN: 960-7839-03-X
  15. A new approach for assessing the interface efficiency on standard full-composite specimens”, by D. Bollas, C. Koimtzoglou, G. Anagnostopoulos, G.C. Psarras, J. Parthenios and C. Galiotis, Proceedings of the 10th European Conference on Composite Materials, Session: Interface-Interphase, June 3-7, (2002), Brugge Belgium
  16. Internal Stress Generation in Composites Incorporating Prestrained Shape Memory Alloy Wires”, by G. C. Psarras, J. Parthenios, D. Bollas and C. Galiotis, Proceedings of the 10th European Conference on Composite Materials, Session: Smart Materials and Construction Components, June 3-7, (2002), Brugge Belgium
  17. Crack-face Bridging Stresses in Carbon/Carbon Composites: Macro-Mechanical Evaluationand Direct In-situ Measurements”, by K.G. Dassios, V. Kostopoulos, C. Galiotis and M. Steen Proceedings of the 10th European Conference on Composite Materials, Session: Interface-Interphase,  June 3-7, 2002, Brugge, Belgium
  18. “A Motorway Composite Bridge made of Glass / Polyester pultruded Elements” by V. Kostopoulos, Y. P. Markopoulos, D. E. Vlachos, D. G. Katerelos, C. Galiotis, T. Tsiknias, D. Zacharopoulos, Ch. Kontomitros, D. Karalekas, P. Chronis and D. Kalomallos, Proceedings of ECCM 10, Session: Applications, June 3 – 7, 2002, Brugge, Belgium
  19. Adaptive composites incorporating shape memory alloy wires; Effect of wire/resin interface upon internal stress transmission’, by J. Parthenios, G. C. Psarras, D. Bollas and C. Galiotis 7th international conference on interfacial phenomena in composite materials, September 11-14, 2001 Bordeaux-Arcachon-France
  20. In-situ measurements of the stress transfer efficiency of full composites during mechanical loading” by G. C. Psarras, J. Parthenios, C. Koimtzoglou and C. Galiotis,, 7th international conference on interfacial phenomena in composite materials, September 11-14, 2001 Bordeaux-Arcachon-France
  21. 9“Mechanical response of intelligent composite systems activated by shape memory alloys wire”, by G. C. Psarras, J. Parthenios and C. Galiotis ECCM9, Brighton 2000, June 4-7. Τα πρακτικά του συνεδρίου δημοσιεύτηκαν σε CD-ROM
  22. “Determination of Stiffness Reduction and Residual Strain, caused by Transverse Cracking, in Composite Laminates using an Embedded Aramid Fibre Strain Sensor” by D. G. Katerelos, C. Galiotis, S. L. Ogin and R. D. Whattingham, Proceedings of ECCM 9, June 4 – 7, 2000, Brighton, UK
  23. “A Motorway Composite Bridge made of Glass / Polyester pultruded Elements” by V. Kostopoulos, Y. P. Markopoulos, D. E. Vlachos, D. G. Katerelos, C. Galiotis, T. Tsiknias, D. Zacharopoulos, Ch. Kontomitros, D. Karalekas, P. Chronis and D. Kalomallos, ECCM 10, June 3-7, 2002, Brugge, Belgium
  24. "Mechanical Response of Intelligent Composite Systems Activated by Shape Memory Alloys Wires" by G.C.Psarras, J.Parthenios and C.Galiotis, ECCM9, Brighton, UK, 4-7 June 2000
  25. "Effect of Fatique Loading Upon the Stress Transfer Efficiency in Carbon Fibre Composites" by C.Koimtzoglou and C.Galiotis, ECCM9, Brighton, UK, 4-7 June 2000
  26. "Determination of Stiffness Reduction and Residual Strain Caused by Transverse Cracking Using an Embedded Aramid Fibre Strain Sensor" by D.G.Katerelos, C.Galiotis, S.L.Ogin and R.D. Whattingham, ECCM9, Brighton, UK, 4-7 June 2000
  27. Unification of Fibre/ Matrix Interfacial Measurements with Laser Raman Spectroscopy”, by C. Galiotis, A. Paipetis and C. Marston, ICCM-12, Interfaces & Interphases, Paris, Woodhead Publ., 1999
  28. Bulk and Surface Stress/ Strain Measurements in Composite Laminates with a Fibre-Optic Raman Probe”, C. Galiotis and B. Arjyal, ICCM-12, Smart Materials and Smart Manufacturing, Woodhead Publ., 1999
  29. Raman Spectroscopy as a Tool for Strain Measurements” by C. Galiotis, Proc. Of the Inter. G. Papatheodorou Symp., 17-18 Sept. 1999, Patras, Greece, ISBN:960-7839-01-3, 239-243
  30. A Smart Raman Sensor for Localised Surface and Bulk Stress/ Strain Measurements in Laminates” B. Arjyal and C. Galiotis, ECCM-8, “Science, Technologies and Applications”, ed. I. Crivelli-Visconti, Woodhead Publ. Ltd. (Cambridge), vol.3, ISBN 1 85573 409 5, 1998, 277-279
  31. “Monitor the Stress Transfer Characteristics in Composites under Static and Dynamic Loading Conditions”, by C. Koimtzoglou, V. Kostopoulos, C. Galiotis and S. A.Paipetis, ECCM-8, “Science, Technologies and Applications”, ed. I. Crivelli-Visconti, Woodhead Publ. Ltd. (Cambridge), vol.3, ISBN 1 85573 409 5, 1998, 281-283
  32. Non-Destructive Investigation of the Effects of Interface, Volumer Fraction and Geometry upon Stress Redistribution in Polymer Composites under Tension” A. Paipetis, V. Chohan and C. Galiotis, ECCM-8, “Science, Technologies and Applications”, ed. I. Crivelli-Visconti, Woodhead Publ. Ltd. (Cambridge), vol.3, ISBN 1 85573 409 5, 433-434
  33. “Structure and Morphology of Syndiotactic Polystyrene’’, by C. Galiotis, 4th Panhellenic Conference on Polymers (1997),  Greek Polymer Society, 102-106
  34. “Determination of the Stress Transfer Mechanism in Polymeric Matrix Composite Materials Using the Technique of Laser Raman Spectroscopy’’, by C. Koimtzoglou and C. Galiotis, 4th Panhellenic Conference on Polymers (1997),  Greek Polymer Society, 241-245
  35. Assessing the Effect of Fatigue on the Interfacial Properties of Model Composites Using the Fragmentation Test and the Technique of Laser Raman Microscopy” by C. Koimtzoglou, V. Kostopoulos, N. E. Melanitis, C. Galiotis, Proceedings of the 8th International Conference on Mechanics and Technology of Composite Materials, Sofia, Bulgaria, September 1997,  259-264
  36. Application of a Laser Raman Sensor for Stress Monitoring in Composites” by B. Arjyal and C. Galiotis in “Proceedings of the 3rd International Conference on Intelligent Materials” ICIM’96, Lyon, France, 1996, ed. P.F.Gobin and J.Tatibouet, pub. SPIE Vol. 2779,  142-145, ISBN 0-8194-2165-0
  37. Characterisation of Strain Distribution in Fibres Bridging Ceramic Matrix Cracks by Laser Raman Spectroscopy” by F.Bollet, C. Galiotis and M.J.Reece “Realising Their Commercial Potential”, vol.1, ECCM-7, The Institute of Materials, 1996, publ. Woodhead Publ. Ltd., Cambridge,  505-510
  38. Progression of Interfacial Failure in Kevlar 49 and Carfon Fibre Composites: Elasto-Plastic Finite Element Analysis” by R.B.Nath, D.N.Fenner and C.Galiotis in “Realising Their Commercial Potential”, vol.1, ECCM-7, The Institute of Materials, 1996, publ. Woodhead Publ. Ltd., Cambridge, 27-32
  39. Assessing the Effect of Fibre Sizing, Material Processing and Temperature upon the Stress Characteristics in Composites” by A. Paipetis and C. Galiotis in “Realising Their Commercial Potential”,vol. 2, ECCM-7, The Institute of Materials, 1996, publ. Woodhead Publ. Ltd., Cambridge,  213-218
  40. A Smart Raman Sensor for Localised Stress or Strain Measurements Inside Laminates” by B. Arjyal and C. Galiotis“Realising Their Commercial Potential”, vol.2, ECCM-7, The Institute of Materials, 1996, publ. Woodhead Publ. Ltd., Cambridge,  35-40
  41. Assessing the Strength of the Interface and the Fracture Characteristics of Composites Using the Technique of Laser Raman Microscopy” by C. Galiotis, V. Chohan, A. Paipetis and C. Vlattas in “High Technology Composites in Modern Applications, Comp’95, ed. by S. A. Paipetis and A. G. Youtsos, Univ. Patras, Patras,  54-65
  42. Assessing the Effect of Sizing in Carbon Fibre/ Epoxy Interfaces Using Remote Laser Raman Spectroscopy” by A. Paipetis and C. Galiotis in “High Technology Composites in Modern Applications, Comp’95, ed. by S. A. Paipetis and A. G. Youtsos, Univ. Patras, Patras,  37-45
  43. Micromechanics of Reinforcement in Single and Multifibre Composites” by C. Galiotis, Proceedings of the 4th National Congress on Mechanics, Univ. of Thrace, Greece, June 26-29, 1995,  66-77
  44. Raman Stress Sensor for Localised Stress Measurements in Composite Laminates” by B. Arjyal and C. Galiotis, Smart Structures: Optical Instrumentation and Sensing Systems, Europt Series, Vol. 2509, Ed. D. G. Uttamchandani, SPIE 1995, 99-108, ISBN 0-8194-1867-6
  45. Finite Element Modelling of Interfacial Failure in Carbon Fibre-Epoxy Composites” by R. B. Nath, D. N. Fenner and C. Galiotis, Deformation and Fracture of Composites’95, The Institute of Materials (1995), 606-615
  46. Fracture Characteristics and Interfacial Strength of Full Composites by Remote Laser Raman Microscopy” by C. Galiotis and V. Chohan, Deformation and Fracture of Composites’95, The Institute of Materials (1995), 115-125
  47. Stress/Strain Measurements in Fibres and Composites Using Remote Laser Raman Microscopy” by C. Galiotis, Proceedings of ICORS-14, edited by N-T Yu and X-Y Li, John Wiley & Sons, Chichester (1994), 802-803, ISBN 0-471-95216-8
  48. "Studying the Deformation of High Performance Fibres in Tension and Compression by Spectroscopic-Mechanical Methods” by C. Vlattas and C. Galiotis, 9th International Conference on Deformation Yield & Fracture of Polymers Polymers”, Cambridge, 11-14 April 1994, p.12/1
  49. “Application of Raman Microscope Spectroscopy to Ceramic Matrix Composites” by F. Bollet, C. Galiotis, M. J. Reece, L. S. Schadler and M. J. Koczak, Royal Microscopic Society, Proceedings, 29/2 (1994), p.93
  50. “Laser Raman Microscopy: A New Stress/ Strain Measurement Technique for the  Non-Destructive Inspection of Polymer Composites” by C. Galiotis, Royal Microscopic Society, Proceedings, 29/2 (1994), p.90
  51. "The Role of Interface in Polymer Based Composites and Test Methods for Evaluating Its Performance" by C. Galiotis, "Developments in the Science and Technology of Composite Materials", published by Woodhead Publishing Co., Cambridge (1993), eds.A. R. Bunsell, A. Kelly and A. Massiah, 19-30
  52. "Microstructural Analysis of Ferroelectric Glass Ceramics" by M. J. Reece, C. A. Worell, G. J. Hill, P. L. Tetlow, C. Galiotis and R. Morell, Proceedings of the 3rd Conference of the European Ceramics Society, Madrid, 13-17 Sept., 1993, vol.2,  217-223
  53. "Strain Mapping in Carbon Fibre/ PEEK Composites" by C. Filiou and C. Galiotis, "Deformation, Yield & Fracture of Composites", InstM (1993), paper 7, 1-9
  54. "Parallels between Micro- and Macro- Compression Failure in Aligned Fibre Composites"  by C. Galiotis, F. J. Guild, P .J. Hogg, D. Hua, N. Melanitis and P. L. Tetlow in "Deformation, Yield & Fracture of Composites", InstM (1993), paper 26, 1-10
  55. "Interfacial Measurements in Single Fibre Model Composites" by C. Galiotis, N. Melanitis, C. Vlattas and A. Wall, "Deformation, Yield & Fracture of Composites", InstM (1993), paper 14, 1-10
  56. "In-situ Strain Measurements in Carbon-Fibre/ Thermoplastic Composites" by C. Filiou, C. Galiotis, PEG publications (1992), GR/G 10890
  57. "Interface Micromechanics in Aramid/ Epoxy Model Composites" by C. Vlattas and C. Galiotis in "Developments in the Science and Technonogy of Composite Materials", ECCM 5, eds. A. R. Bunsell, J. F. Jamet and A. Massiah, Bordeaux, France (1992),  415-420
  58. "Fibre Strain Distribution and Residual Thermal Stresses in Carbon Fibre/ PEEK Composites" by C. Galiotis and Filiou, in "Developments in the Science and Technonogy of Composite Materials", ECCM 5, eds. A. R. Bunsell, J. F. Jamet and A. Massiah, Bordeaux, France (1992),  397-402
  59. "Molecular Deformation of High Performance Fibres in Tension and Compression"  by N. Melanitis and C. Galiotis in "Developments in the Science and Technonogy of Composite Materials", ECCM 5, eds. A. R. Bunsell, J. F. Jamet and A. Massiah, Bordeaux, France (1992),  213-318
  60. "Monitoring the Fibre Strain Distribution in Carbon Fibre/ PEEK Composites" by C. Filiou and C. Galiotis, FRC'92, pub. "The Plastics & Rubber Institute" (London), paper 18/1-10 (1992)
  61. "Modelling Aramid-Epoxy Interfaces Using Finite Element Analysis" by F. J. Guild, C. Galiotis, H. Jahankhani and C. Vlattas, in "Interfacial Phenomena in Composite Materials '91", ed. by I. Verpoest and F. Jones, Butterworth-Heinemann (1991),  26-29, ISBN 0-7506-0356-9
  62. "Fragmentation Studies on Carbon Fibre/ Epoxy Systems Using  Laser Raman Spectroscopy" by N. Melanitis, P. L. Tetlow, C. Galiotis and C. K. L. Davies, "Interfacial Phenomena in Composite Materials '91", ed. by I. Verpoest and F. Jones, Butterworth-Heinemann (1991),  288-289, BN 0-7506-0356-9
  63. "Strain Mapping in Carbon Fibre/ Thermoplastic Composites Using Laser Raman Spectroscopy", by C. D. Filiou and C. Galiotis, Proceedings of 1st Conference on Deformation and Fracture of Composites, Manchester, Plastics and Rubber Institute, 20/1-4 (1991), ISBN 1-871571-94-4
  64. "Micromechanical Studies on Single Fibre Model Composites" by C. Vlattas and C. Galiotis, Proceedings of 1st Conference on Deformation and Fracture of Composites, Manchester, Plastics and Rubber Institute, 58/1-4 (1991), ISBN 1-871571-94-4
  65. "Studies of Carbon Fibres under Axial Compression" by C. Galiotis and N. Melanitis, in "Developments in the Science and Technology of Composite Materials", ECCM-4, 25-28 September 1990, Stuttgart, FRG, ed. J. Fuller et al, Elsevier Applied Science, London and  N. Y.,  525-530, BN 1-85166-562-5
  66. "Monitoring Interfacial Phenomena in Single Fibre Model Composites" by C. Galiotis and H. Jahankhani, in "Developments in the Science and Technology of Composite Materials", ECCM-4, 25-28 September 1990, Stuttgart, FRG, ed. J. Fuller et  al, Elsevier Applied Science, London and N. Y.,  679-684, ISBN 1-85166-562-5
  67. "Interfacial Shear Stress Mapping in Model Composites" by C. Galiotis, N. Melanitis, P. L. Tetlow and C. K. L. Davies, Proceedings of the American Society for Composites, 5th  Technical Conference, June 12-14 (1990), East Lansing, Michigan, 276-286
  68. "Interfacial Studies on Aramid/ Epoxy Systems" by H. Jahankhani and C. Galiotis in Proceedings of ICCM-VII, ed. by W.Yunshu et al, Guangzhou, China, vol.2, 143-148, International Academic Publishers, Pergamon Press, Beijing (1990)
  69. "Interfacial Studies in aramid/epoxy systems with Laser Raman Spectroscopy" by H. Jahankhani, C. Vlattas and C. Galiotis in "Interfacial Phenomena in Composite Materials '89", ed. F. R. Jones, Butterworths, Sept. 89, 125-131
  70. "Characterisation of Carbon Fibre Surfaces and Examination of Carbon Fibre/ Epoxy Interfaces with Laser Raman Spectroscopy" by N. Melanitis, P. Tetlow, C. Galiotis and C. K. L. Davies in "Interfacial Phenomena in Composite Materials '89", ed. F. R. Jones, Butterworths, Sept. 89,  97-104
  71. "Raman Optomechanical Studies on Fibres and Composites" by C.Galiotis, H. Jahankhani, N. Melanitis and D.N.Batchelder in "Developments in the Science and Technology of Composite Materials", ECCM3, ed. by A.R.Bunsell, P. Lamicq, A. Massiah, Elsevier Applied Sci., March 1989, 765-770
  72. "The Raman Optomechanical Strain Gauge" by D. N. Batchelder and C. Galiotis in "Stress  and  Vibration" ed. by P. Stanley, SPIE, 1084 (1989),  34-44
  73. "Interfacial Studies on Kevlar/Epoxy Systems in Tension and Compression" by H. Jahankhani and C. Galiotis in "Interfaces in Polymer, Ceramic and Metal Matrix  Composites", ed. H. Ishida, Elsevier Science, New York (1988), p.107-121
  74. "Non-Destructive Evaluation of Composite Materials Using a Raman Optomechanical Strain Gauge", by I. M. Robinson, R. J. Young, C. Galiotis and D. N. Batchelder, ICCM Proceedings, 20-24 July 1987, 1, edited by F. L. Mathews, N. C. R. Buskell and J. Morton, Elsevier Applied Science, 333-340
  75. "Measurement of Fibre Strain in All-Polymer Composites" by R. J. Young, C. Galiotis, I. M. Robinson and D. N. Batchelder, Proceedings of "Deformation, Yield and Fracture of Polymers", Churchill College, Cambridge, 1-4 April 1985, Paper 71, edited by the Plastics and Rubber Institute, London, U.K
  76. "Structure and Deformation of Polydiacetylene Single Crystal Fibres" by C. Galiotis and R. J. Young, Proceedings of 28th Macromolecular Symposium, IUPAC, 12-16 July 1982, Amherst. Mass., USA, Paper 619, edited by I. Luderwald and R. Weis
  77. "Deformation and Fracture of Polydiacetylene Single Crystal Fibres" by D. N. Batchelder, C. Galiotis, R. T. Read and R. J. Young, Proceedings of "Deformation, Yield and Fracture of Polymers", Churchill College, Cambridge, 29 March-1 April 1982, Paper 2, edited by the Plastics and Rubber Institute, London
  78. "The Synthesis, Crystal Growth and Solid-State Polymerisation of Closely Related Diacetylene Monomers" by D. J. Ando, D. Bloor, C. Galiotis and I. F. Chalmers, Proceedings of 26th Macromolecular Symp., IUPAC, 17-21 Sept. 1979, Mainz (Germany), Paper A42-41, edit. by I. Luderwald and R. Weis.
Read more...

Publications in Journals

  1. "Effect of Fatigue on the Interface Integrity of Unidirectional Cf-Reinforced Epoxy Resin Composites" by C. Koimtzoglou, K.Dassios and C. Galiotis , Acta Materialia (2009), doi:10.1016/j.actamat.2009.02.038
  2. "Single-walled carbon nanotubes decorated with a pyrene–fluorenevinylene conjugate" by D. Tasis, J. Mikroyannidis, V. Karoutsos, C. Galiotis and K. Papagelis, Nanotechnology 20 (2009), 135606-135613
  3. “Matrix cracking in polymeric composites laminates: Modelling and experiments” by D.T.G. Katerelos, M.Kashtalyan, C.Soutis, C.Galiotis, Composites Science and Technology, 68/12 (2008), 2310-2317.
  4. “Energy criterion for modelling damage evolution in cross-ply composite laminates” by D.T.G. Katerelos, J. Varna, C. Galiotis, Composites Science and Technology, 68/12 (2008), 2318-2324.
  5. “Chemical Oxidation of Multi Walled Carbon Nanotubes” by V. Datsyuk, M. Kalyva, K. Papagelis, J. Parthenios, D. Tasis, A. Siokou, I. Kallitsis and C. Galiotis, Carbon, 46/6  (2008), 833-840.
  6. “Accelerated environmental ageing study of polyester/glass fiber reinforced composites (GFRPCs)” by Dionysis E. Mouzakis, Helen Zoga and Costas Galiotis, Composites Part B: Engineering,39/3 (2008), 467-475.
  7. “Thermal stress development in fibrous composites” by G.Anagnostopoulos, J.Parthenios and C.Galiotis, Materials Letters, 62/3 (2008), 341-345.
  8. "Oxidized Multi-Walled Carbon Nanotube Film Fabrication and Characterization” by Kastanis D., Tasis D., Papagelis K., Parthenios J., Tsakiroglou C., Galiotis C., Advanced Composites Letters, 16/6 (2007), 243-248
  9. Covalently functionalized carbon nanotubes as macroinitiators for radical polymerization” by Papagelis, K, Kalyva, M, Tasis, D, Parthenios, I, Siokou, A, Galiotis, C, Physica Status Solidi B-Basic Solid State Physics,  244/11(2007),  4046-4050
  10. “High pressure Raman study of the second-order vibrational modes of single- and double-walled carbon nanotubes” by Papagelis, K, Andrikopoulos, KS, Arvanifidis, J, Christofilos, A, Galiotis, C, Takenobu, T,  Iwasa, Y, Kataura, H, Ves, S, Kourouklis, GA., Physica Status Solidi B-Basic State Physics, 244/11 (2007), 4069-4073
  11. “Growth of calcium carbonate on non-covalently modified carbon nanotubes” by D. Tasis, S. Pispas, C.Galiotis and N. Bouropoulos, Materials Letters, 61/28 (2007), 5044-5046.
  12. “Water-solube carbon nanotubes by redox radical polymerization” by D.Tassis, K.Papageelis, M.Prato, I.Kallitsis and C.Galiotis, Macromolecular Rapid Communications, 28/15 (2007), 1553-1558
  13. “Transformation fatique and stress relaxation of shape memory alloy wires” byP Pappas, D Bollas, J Parthenios, V Dracopoulos and C Galiotis, Smart Mater. Struct. 16/6 (2007) 2560-2570
  14. “Analysis of matrix cracking in GFRP laminates using Raman spectroscopy” by D.T.G. Katerelos, P.Lundmark, J.Varna and C.Galiotis, Composites Science and Technology, 67/9, 1946-1954 (2007)
  15. Stress generation by shape memory alloy wires embedded in polymer composites” by D.Bollas, P.Pappas, J.Parthenios and C.Galiotis, Acta materialia, 55/16, 5489-5499 (2007)
  16. “Phonon stress sensitivity for interface characterization of fibrous composites at various temperatures by G. Anagnostopoulos, J. Parthenios and C. Galiotis, Acta Materialia, 55/11, 3783-3793 (2007)
  17. “Quantifying crystalline fraction within polymer spherulites” by K. Gatos, C. Minogianni and C. Galiotis, Macromolecules, 40, 786-789 (2007)
  18. “Raman spectroscopy investigation of stiffness change and residual strains due to matrix cracking” by Katerelos DG, Lundmark P, Varna J and C. Galiotis., Mechanics of Composite Materials, 42 (6), 535-546 (2006)
  19. “Viscoplastic finite element analysis of matrix crack propagation in model continuous-carbon fibre/epoxy composites” by S. Sirivedin, D.N. Fenner, R.B. Nath and C. GaliotisComposites Part A: Applied Science and Manufacturing,  37/ 11, 1922-1935 (2006).
  20. Effects of inter-fibre spacing and matrix cracks on stress amplification factors in carbon-fibre/epoxy matrix composites, Part II: Hexagonal array of fibres” by D.N. Fenner, R.B. Nath and C. Galiotis,  Composites Part A: Applied Science and Manufacturing, 37/ 11, 1936-1943 (2006)
  21. “Growth of calcium phosphate mineral on carbon nanotube buckypapers” by D. Tasis, D. Kastanis, C. Galiotis, and N. Bouropoulos, Phys. Stat. Sol. (b), 243/13, 3230-3233 (2006)
  22. “Effect of Off – Axis Matrix Cracking on Stiffness of Symmetric Angle-Ply Composite Laminates” by D. G. Katerelos, L. N. McCartney and C. Galiotis, International Journal of Fracture, 139, 529-536 (2006)
  23. Direct measurement of fiber bridging in notched glass-ceramic-matrix composites” by K.G. Dassios and C. Galiotis,  Journal of Materials Research, 21/5, 1150-1160 (2006)
  24. “Effect of Stress and Temperature on the Optical Phonons of Aramid Fibers” by D. Bollas, J. Parthenios and C. Galiotis, Physical Review B, 73, 094103 (2006)
  25. Enhancing the Damping of Wind turbine Rotor Blades, the DAMBLADE Project” by P.K.Chaviaropoulos, E.S. Politis, D.J.Lekou, N.N.Sorensen, M.H.Hansen, B.H.Bulder, D. Winkelaar, C.Lindenburg, D.A. Saravanos, T.P.Philippidis, C.Galiotis, M.O.L. Hansen and T.Kossivas, Wind Energy, 9, 163-177 (2006)
  26. Design and construction of a vehicular bridge made of glass/polyester pultruded box beams”, by Kostopoulos V, Markopoulos YP, Vlachos DE, Katerelos D, Galiotis C, Tsiknias T, Zacharopoulos D, Karalekas D, Chronis P, Kalomallos D,  Plastics Rubber and Composites,  34/4, 201-207 (2005)
  27. “Global method for measuring stress in polymer fibers at elevated  temperatures” by  G. Anagnostopoulos, A.G. Andreopoulos, J. Parthenios, C.Galiotis, Applied Physics Letts, 87/13, 131910-2 (2005)
  28. “Experimental Determination of Stress Concentrations in Composite Laminates and their Effects on Damage Evolution” by D. G. Katerelos and C. Galiotis, Applied Mechanics and Materials, 5-6, 383-390 (2005)
  29. “Estimation of crystallinity in isotropic isotactic polypropylene with Raman spectroscopy” by C. Minogianni, K.G. Gatos, C. Galiotis, Applied Spectroscopy, 59/9, 1141-1147 (2005)
  30. “An experimental and theoretical study of the stress transfer problem in fibrous composites”,  by G. Anagnostopoulos,J. Parthenios, A. G. Andreopoulos  and C. Galiotis, Acta Materialia, 53/15, 4173-4183 (2005)
  31. “Local strain re-distribution and stiffness degradation in cross-ply polymer composites under tension” by D.G.Katerelos, L.N.McCartney and C.Galiotis, Acta Materialia, 53/12, 3335-3343 (2005)
  32. Determination of interface integrity in high volume fraction polymer composites at all strain levels” by G. Anagnostopoulos, D. Bollas, J. Parthenios, G.C. Psarras and C. Galiotis, Acta Materialia, 53/3  (2005), 647-657
  33. “Axial strain redistribution resulting from off-axis ply cracking in polymer composites” by Dionisis G. Katerelos and Costas Galiotis, Applied Physics Letters, 85/17, 3752-3754 (2004).
  34. "Fluorescence Studies of Polycrystalline Al2O3 Composite Constituents: Piezo-Spectroscopic Calibration and Applications" by Konstantinos G. Dassios and Costas Galiotis, Applied Physics A79, 647-659 (2004)
  35. “Mechanically and thermally induced chain conformational transformations between helical form I and trans-planar form III in syndiotactic polypropylene using FT-IR and Raman spectroscopic techniques” K.G. Gatos, G. Kandilioti, C. Galiotis, V. G. Gregoriou, Polymer, 45/13, 4453-4464 (2004)
  36. “Compressive failure mechanisms in multi-fibre microcomposites”, S. Goutianos, C. Galiotis, T. Peijs,  Composites-Part A, 35/4, 461-475 (2004)
  37. "Mechanisms of stress transfer and interface integrity in carbon/epoxy composites under compression loading. Part II: Numerical approach" by S. Goutianos, T. Peijs and C. Galiotis, Int. J. Solids & Structures, 40/21, 5521-5538 (2003)
  38. “Stress and temperature self-sensing fibres” by G.C. Psarras, J. Parthenios, D. Bollas and C. Galiotis
     Chem. Phys. Lett. 367, 270-277 (2003)
  39. “Effects of inter-fibre spacing and matrix cracks on stress-amplification factors in carbon-fibre/epoxy matrix composites, Part 1: Planar array of fibres” by Sirivedin, S., Fenner, D.N., Nath, R.B. & Galiotis, C., Composites- Part A, 34, 1227-1234 (2003)
  40. "Direct In Situ Measurements of Bridging Stresses in CFCCs", by Konstantinos G. Dassios, Costas Galiotis, Vassilis Kostopoulos and Marc Steen, Acta Materialia, 51/18, 5359-5373 (2003)
  41. “Stress Transfer Efficiency in Model Composites under Dynamic Loading” by C. Koimtzoglou, V. Kostopoulos and C. Galiotis, Applied Physics-A, 76/2, 231-239 (2003)
  42. “Progress in Composites with Embedded Shape Memory Alloy Wires” by J. Schrooten, V. Michaud, J. Parthenios, G. C. Psarras, C. Galiotis, R. Gotthardt, J. A. Manson and J. Van Humbeeck, Materials Transactions (The Japan Institute of Metals), 43/5, 961-973 (2002)
  43. “Aramid Fibers; a Multifunctional Sensor for Monitoring Stress/ Strain Fields and Damage Development in Composite Materials” by J. Parthenios, D. G. Katerelos, G. C. Psarras and C. Galiotis, Engineering Fracture Mechanics, 69, 1067-1087 (2002)
  44. “Mechanisms of stress transfer and interface Integrity in Carbon/ Epoxy Composites under Tension and Compression Loading. Part 1: Experimental Investigation” by S.Goutianos, T. Peijs and C. Galiotis, Int. J. Solids & Structures, 39/12, 3217-3231 (2002)
  45. “Comparative Assessment of Stress Transfer Efficience in Tension and Compression” by Goutianos S., Peijs T., Galiotis C., Compos.Part A-Appl. S., 33, 1303-1309 (2002)
  46. “Adaptive Composites Incorporating Shape Memory Alloy Wires; Part 2: Development of internal recovery stresses as a function of activation temperature” by J. Pathenios, G. C. Psarras and C. Galiotis, Composites-Part A, 32/12, 1735-1747 (2001)
  47. Detailed Atomistic Molecular Dynamics Simulation of the Orthorombic Phase of Crystalline Polyethylene with the COMPASS Force Field” by I-E Mavrantzas, D. Prentzas, V. G. Mavrantzas, and C. Galiotis, Journal of Chemical Physics, 115/ 8, 3937-3950 (2001)
  48. “Adaptive Composites Incorporating Shape Memory Alloy Wires; Part 1: Probing the internal stress and temperature distributions with a laser Raman sensor” by G. C. Psarras, J. Pathenios and C. Galiotis, Journal of Materials Science, 36, 535-546 (2001)
  49. “Modelling the Stress Transfer Efficiency in Carbon/ Epoxy Composites”, by A. Paipetis and C. Galiotis, Proc. Royal Soc.–A 457, 1555-1577 (2001)
  50. “Micromechanics of Reinforcement and Damage Initiation in Carbon Fibre/ Epoxy Composites under Fatigue Loading” by C. Koimtzoglou, V.Kostopoulos and C. Galiotis, Composites Part A, 32, 457-471(2001)
  51. “Matrix Crack Propagation Criteria for Model Short Carbon Fibre-Epoxy Composites” by S. Sirivedin, D. N. Fenner, R. B. Nath and C. Galiotis, Composite Science & Technology, 60/15, 2835-2847 (2000)
  52. “The progressional approach to interfacial failure in carbon reinforced composites: elasto-plastc finite element modelling of interface cracks”, R. B. Nath, D. N. Fenner and C. Galiotis Composites-Part A, 31, 929-943 (2000)
  53. “Measurement and Modeling of the Stress Concentration at a Circular Notch in Composite Materials” by B. P. Arjyal, D. G. Katerelos, C. Filiou and C. Galiotis, Journal of Experimental Mechanics, 40/ 3, 248-256 (2000)
  54. ‘Determination of Molecular Changes in Soft Tissues Under Strain Using Laser Raman Microscopy’, Y-N. Wang, C. Galiotis and D. L. Bader, Journal of Biomechanics, 33, 483-487 (2000)
  55. “Unification of Fibre/ Matrix Interfacial Measurements with Laser Raman Spectroscopy”, by C. Galiotis, A. Paipetis and C. Marston, J. Raman Spectroscopy, 30/10, 899-912 (1999)
  56. “In-Situ Monitoring of the Fibre Strain Distribution in Carbon Fibre Thermoplastic Composites Using Laser Raman Spectroscopy; Part 1- Effect of Applied Tensile Stress” by C. Filiou and C. Galiotis, Composites Science & Technology, 59/14, 2149-2161 (1999)
  57. “Surface and Bulk Stress/Strain Measurements in Composite Laminates with a Fibre Optic Raman Probe” by B. P. Arjyal, P.A. Tarantili, A.G. Andreopoulos and C. Galiotis, Composites, 30/10, 1187-1195 (1999)
  58. ‘‘Stress Transfer From the Matrix to the Fibre in a Fragmentation Test: Raman Experiments and Analytical Modeling by A. Paipetis, Y-C Liu, C. Galiotis and J. A. Nairn, Journal of Composite Materials, 33/4, 377-399 (1999)
  59. “On the Failure of Unidirectional Carbon-Epoxy Composites- Part 1: The Effect of Fibre Sizing upon Filament Fracture and Damage Evolution”, C. Marston and C. Galiotis, Journal of Materials Science, 33 (1998), 5311-5325
  60. “Real-Time Micro-Raman Measurements on Stressed Polyethylene Fibres. Part 1- Strain rate effects and molecular stress redistribution” by P.A. Tarantili, A.G. Andreopoulos and C. Galiotis, Macromolecules, 31/20, 6954-6976 (1998)
  61. ‘Residual Strain and Young’s Modulus Determination in Cross-Ply Composites with an Embedded Aramid Fibre Strain Sensor’, B.P. Arjyal, C. Galiotis, S. L. Ogin and R. D. Whattingham, Composites Part A, 29/11, 1363-1369 (1998)
  62. ‘Monitoring Local Strain Magnification in Cross-Ply Composites with an Embedded Aramid Fibre Strain Sensor’, B.P. Arjyal, C. Galiotis, S. L. Ogin and R. D. Whattingham, Journal of Materials Science, 33/11, 2745-2750 (1998)
  63. ‘Definition and Measurement of the Shear-Lag Parameter Beta as an Index of the Stress Transfer Efficiency in Polymer Composites’ by C. Galiotis and A. Paipetis, Journal of Materials Science, 33/5,  1137-1143 (1998)
  64. ‘‘Application of Composites to Civil Engineering Structures; Shear and Bending of Beam-to-Column Composite Sections’’ by E. Gutierrez, G. Verzeletti and C. Galiotis, Advanced Composites Letters, 6/2, 47-52 (1997)
  65. “Raman Vibrational Studies of Atactic and Syndiotactic Polystyrene- Part 2: Use of the ν1 Fundamental Vibrational Mode as a Quantitative Measure of Crystallinity within Isotropic Materials” by E. J. C. Kellar, A. Evans, C. Galiotis and E. H. Andrews, Macromolecules, 30/ 8, 2400-2407 (1997)
  66. “Effects of Interface, Volume Fraction and Geometry upon Stress Re-Distribution in Polymer Composites under Tension” by V.Chohan and C.Galiotis, Composites Science and Technology, 57/8, 1089-1101(1997)
  67. “Measurement of Stress Concentration around Fibre Breaks in Carbon/ Epoxy Resin Composite Tows” by C. Marston, B. Gabbitas, J. Adams, S. Nutt, P. Marshall and C. Galiotis, Composite Science and Technology, 57/8,  913-923  (1997)
  68. “The Structure and Morphology of Syndiotactic Polystyrene Injection Moulded Coupons” by A. M. Evans, E. J. C. Kellar, J. Knowles, C. Galiotis and E. H. Andrews, Pol. Science & Eng., 37/1, 153-165 (1997)
  69. “A Study of the Stress-Transfer Characteristics in Model Composites as a Function of Material Processing, Fibre Sizing and Temperature of the Environment” by A. Paipetis and C. Galiotis, Composite Science and Technology, 57/8,  827-838 (1997)
  70. "Fibre-Matrix Mechanical Interaction in Carbon Fibre / Bismaleimide Model Composites ", J .P. Favre, M. H. Auvray, P. CheneauHenry, C. Galiotis, C. Vlattas, A. Paipetis, M. Pegorano, F. Severini, L. DiLandro, L. J. Yuan, Polymer Composites, 17/6,  937-947 (1996)
  71. “Failure Characteristics in Carbon Epoxy Composite Tows” by C. Marston, B. Gabbitas, J. Adams, S. Nutt, P. Marshall and C. Galiotis, Composites, 27A/12, 1183-1194 (1996)
  72. “Measurement of Strain Distribution in Fibre Reinforced Ceramic Matrix Composites” by F. Bollet, C. Galiotis and M. J. Reece, Composites, 27A, 729-735 (1996)
  73. “Effect of Sizing on the Stress Transfer Characteristics and Interface Failure Modes of Model Carbon Fibre/ Epoxy Composites by A. Paipetis and C. Galiotis, Composites, 27A, 755-767 (1996)
  74. “Interfacial Measurements and Fracture Characteristics of 2D Microcomposites Using Remote Laser Raman Microscopy” by V. Chohan and C. Galiotis, Composites, 27A,  881-888 (1996)
  75. “Elasto-Plastic Finite Element Modelling of Interfacial Failure in Model Kevlar 49 Fibre/ Epoxy Composites” by R. B. Nath, D. N. Fenner and C. Galiotis, Composites, 27A (1996), 821-832
  76. “Finite Element Mocdelling of Interfacial Failure in Model Carbon Fibre-Epoxy Composites” by R. B. Nath, D. N. Fenner and C. Galiotis, Journal of Materials Science, 31, 2879-2883 (1996)
  77. “Stress-Strain Measurements in Advanced Composites Using Remote Laser Raman Microscopy” B. Ajyal, A. Paipetis and C. Galiotis, Non-Destructive Testing and Evaluation, 12,  355-366 (1996)
  78. "Characterisation of PAN-based Carbon Fibres with Laser Raman Spectroscopy. Part 1: Effect of Processing Variables on Raman Band Profiles" by N. Melanitis, P. L. Tetlow and C. Galiotis, Journal of Materials Science, 31, 851-860 (1996)
  79. “Remote Laser Raman Microscopy (ReRaM); Part 1 Design and Testing of a Confocal Microprobe” A. Paipetis, C. Vlattas and C. Galiotis, Journal of Raman Spectroscopy, 27 (1996) 519-526
  80. “Raman Vibrational Studies of Atactic and Syndiotactic Polystyrene- Part 1: Assignment of a conformation/ crystallinity sensitive spectral region” by E. J. C. Kellar, C. Galiotis and E. H. Andrews, Macromolecules, 29, 3515-3520 (1996)
  81. "Analysis of Stress Transfer from the Matrix to the Fiber Through an Imperfect Interface: Application to Raman data and Single-Fiber Fragmentation Test”, J. Nairn, Y-C Liu and C. Galiotis, ASTM-STP 1290, eds. J. C. Spragg and L. T. Drzal, American Society for Testing and Materials, 47-65 (1996)
  82. "Interfacial Measurements in Single and Multi-fibre Composites Using the Technique of Laser Raman Spectroscopy" by C. Galiotis, V. Chohan, A. Paipetis and C. Vlattas, ASTM-STP 1290, eds. J. C. Spragg and L. T. Drzal, American Society for Testing and Materials,  19-33 (1996)
  83. “Localised Stress Measurements in Composite Laminates Using a Raman Stress Sensor, B. Ajyal, and C. Galiotis, Advanced Composite Letters, 4/2  47-52, (1995)
  84. Determination of Stress Distribution in Fibre Bridged Cracks in Ceramic Matrix Composites “ by F. Bollet, C. Galiotis and M. J. Reece, Advanced Composites Letters, 3/4 127-131, (1994)
  85. "Compressional Behaviour of Carbon Fibres. Part 2: Modulus Softening" by N. Melanitis, P. L. Tetlow, C. Galiotis and S. S. Smith, Journal of Materials Science, 29  786-799, (1994)
  86. "Modelling of Stress Transfer in Fibre Composites" by F. J. Guild, C. Vlattas and C. Galiotis, Composites Science & Technology, 50 319-332 (1994)
  87. "Environmental Degradation Studies of the Interface in Single-Filament Graphite/ Epoxy Composites Using Laser Raman Spectroscopy" by M. S. Amer, M. J. Koczak, C. Galiotis, L. S. Schadler, Advanced Composites Letters, 3/1  17-20, (1994)
  88. "Deformation Behaviour of Liquid Crystal Polymer fibres: Part 1. Converting spectroscopic data into mechanical stress-strain curves in tension and compression" by C. Vlattas and C. Galiotis, Polymer, 35/11  2335-2347, (1994)
  89. "Monitoring the Micromechanics of Reinforcement in Carbon fibre/ epoxy resin systems" by N. Melanitis, C. Galiotis, P. L. Tetlow and C. K. L. Davies, Journal of Materials Science, 28  1648-1654, (1993)
  90. "Interfacial Shear Stress Distribution in Model Composites; Part 3, The Effect of Fibre Modulus", C. Galiotis, P. L. Tetlow and C. K. L. Davies, Composites, 24  457 (1993)
  91. "Stress-Transfer Characteristics in Model Composites" by C. Galiotis, Composite Interfaces, 1/4, 321-336, (1993)
  92. "A Study of Mechanisms of Stress-Transfer in Continuous and Discontinuous Fibre Model Composites Using Laser Raman Spectroscopy" by, C. Galiotis, Composites Science & Technology, 48 15-28, (1993)
  93. "Strain Mapping in Aramid/ Epoxy Microcomposites" by K. M. Atallah and C. Galiotis, Composites, 24/8 635-642, (1993)
  94. "Interfacial Micromechanics Using Laser Raman Spectroscopy" by N. Melanitis and C. Galiotis, Proc. of Royal Soc.-A, 440 379-398, (1993)
  95. "Residual Stress Distribution in Carbon Fibre/ Thermoplastic Matrix Pre-impregnated Composite Tapes" by C. D. Filiou, C. Galiotis and D. N. Batchelder, Composites, 28/1 28-37, (1992)
  96. “Interfacial Studies on Carbon/ Thermoplastic Model Composites Using Laser Raman Spectroscopy" by L. S. Schadler, N. Melanitis, C. Galiotis, J. C. Figueroa and C. Laird, J. Mater. Sci., 27/6  1663-1671, (1992)
  97. "Interfacial Shear Stress Distribution in Model Composites; Part 2, Fragmentation studies on Carbon Fibre/ Epoxy systems" by N. Melanitis, C. Galiotis, P. L. Tetlow and C. K. L. Davies, Journal of Composite Materials, 26 574-610, (1992)
  98. "Phase Transformation around Indentations in Zirconia" by M. J. Reece, P. L. Tetlow and C. Galiotis, Journal Materials Science-Letters, 11 575-577, (1992)
  99. "Interfacial Shear Stress Distribution in Model Composites; Part 1, A Kevlar 49 fibre in an Epoxy Matrix" by H. Jahankhani and C. Galiotis, Journal of Composite Materials, 25  609-631, (1991)
  100. "The study of Model Polydiacetylene/ Epoxy Composites; Part 3. The Effect of Volume Fraction" I. M. Robinson, C. Galiotis, D. N. Batchelder and R. J. Young, Journal of Materials Science, 26/9  2293-2299 (1991)
  101. "Monitoring  the  Behaviour of Polymer Fibres under Axial Compression" by C.  Vlattas and C. Galiotis, Polymer, 32/10  1788-1793, (1991)
  102. "Interfacial Studies on Model Composites Using Laser Raman Spectroscopy" by C. Galiotis, Composites Science and Technology, 42 125-150, (1991)
  103. "Compressional Behaviour of Carbon Fibres: Part 1; A Raman Spectroscopic Study" by N. Melanitis and C. Galiotis, Journal of Materials Science, 25/12 5081-5090, (1990)
  104. "Strain Dependences of the First and Second Order Raman Spectra of Carbon Fibres, by C. Galiotis and D. N. Batchelder, Journal of Materials Science- Letters, 7  545-547, (1988)
  105. "Residual Strain Mapping in Carbon Fibre/PEEK Composites" by C. Galiotis, N. Melanitis, D. N. Batchelder, I. M. Robinson and J. A. Peacock, Composites, 4  321-324, (1988)
  106. "Chain Stretching in Aramid Fibres" by S. Van der Zwaag, M. G. Northolt, R. J. Young, I. M. Robinson, C. Galiotis and D. N. Batchelder, Polymer Communications, 28 276-277, (1987)
  107. "The Study of Model Polydiacetylene/Epoxy Composites Part 2", by I. M. Robinson, R. J. Young, C. Galiotis and D. N. Batchelder, Journal of Materials Science, 22  3642-3646, (1987)
  108. "Strain Dependence of the Raman Frequencies for Different Types of Carbon Fibres", by I. M. Robinson, M. Zakhikani, R. J. Day,R. J. Young and C. Galiotis, Journal of Materials Science-Letters, 6  1212-1214, (1987)
  109. "Stress Induced Twinning of Polydiacetylene Single Crystal Fibres in Composites" by I. M. Robinson, P. H. Yeung, C. Galiotis, R. J. Young and D. N. Batchelder, Journal of Materials Science, 21 3440-3444,  (1986)
  110. "Strain Dependence of the Raman Frequencies of a Kevlar 49 Fibre" by C. Galiotis, I. M. Robinson, R. J. Young, B. J. E. Smith and D. N. Batchelder, Polymer Communications, 26 354-355, (1985)
  111. "High Modulus Polydiacetylene Single Crystal Fibres" by C. Galiotis, R. T. Read, P. H. J. Yeung and R. J. Young, Journal of Polymer Science: Polymer Physics Edition, 22  1589-1606, (1984)
  112. "The Study of Model Polydiacetylene/Epoxy Composites, Part 1. The Axial Strain in the Fibre" by C. Galiotis, R. J. Young, P. H. Yeung and D. N. Batchelder, Journal of Materials Science, 19 3640-3648, (1984)
  113. "A Resonance Raman Spectroscopic Study of the Strength of the Bonding Between an Epoxy Resin and a Polydiacetylene Fibre" by C. Galiotis, R. J. Young and D. N. Batchelder, Journal of Materials Science- Letters, 2 263-266, (1983)
  114. "Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of  2,4-hexadiyne-1,6-diol, Part III: Mechanical Properties" by C. Galiotis, R. J. Young, Polymer, 24  1023-1030, (1983)
  115. "Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part II: Resonant  Raman Spectroscopy" by C. Galiotis, R. J. Young and D. N. Batchelder, Journal of Polymer Science: Polymer Physics Edition, 21/12  2483-2494, (1983)
  116. "Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part I: Crystal Modification and Polymerisation Kinetics" by C. Galiotis, R. J. Young, D. J. Ando and D. Bloor, Macromolekulare Chemie, 184  1083-1095, (1983)
Read more...

Reviews and Patents

Refereed Reviews

  1. "A Review of the Fundamentals and Applications of LRS Microprobe Strain Measurements", by L. Schadler and C. Galiotis, International Materials Reviews, 40 (3) (1995) 116-134
  2. "Laser Raman Spectroscopy; A New Stress/Strain Measurement Technique for the Remote and On-Line Non-Destructive Inspection of Fibre-Reinforced Polymer Composites" by C. Galiotis, Materials Technology, 8 (1993), 9/10, 203-209

Patents

  1. “Truss Structured Heavy Duty Composite Bridge”,GR patent No. 1003936, issued on 5/7/2002
  2. “Method and Apparatus for Measuring Raman Spectrum and Physical Properties In-Situ”, by J. Dupee, C. Galiotis and D. L. Davidson US Patent # 5,999,255, issued on 7/ 12/1999.
Read more...
Subscribe to this RSS feed