Publications in Journals
- Published in Publications
- "Effect of Fatigue on the Interface Integrity of Unidirectional Cf-Reinforced Epoxy Resin Composites" by C. Koimtzoglou, K.Dassios and C. Galiotis , Acta Materialia (2009), doi:10.1016/j.actamat.2009.02.038
- "Single-walled carbon nanotubes decorated with a pyrene–fluorenevinylene conjugate" by D. Tasis, J. Mikroyannidis, V. Karoutsos, C. Galiotis and K. Papagelis, Nanotechnology 20 (2009), 135606-135613
- “Matrix cracking in polymeric composites laminates: Modelling and experiments” by D.T.G. Katerelos, M.Kashtalyan, C.Soutis, C.Galiotis, Composites Science and Technology, 68/12 (2008), 2310-2317.
- “Energy criterion for modelling damage evolution in cross-ply composite laminates” by D.T.G. Katerelos, J. Varna, C. Galiotis, Composites Science and Technology, 68/12 (2008), 2318-2324.
- “Chemical Oxidation of Multi Walled Carbon Nanotubes” by V. Datsyuk, M. Kalyva, K. Papagelis, J. Parthenios, D. Tasis, A. Siokou, I. Kallitsis and C. Galiotis, Carbon, 46/6 (2008), 833-840.
- “Accelerated environmental ageing study of polyester/glass fiber reinforced composites (GFRPCs)” by Dionysis E. Mouzakis, Helen Zoga and Costas Galiotis, Composites Part B: Engineering,39/3 (2008), 467-475.
- “Thermal stress development in fibrous composites” by G.Anagnostopoulos, J.Parthenios and C.Galiotis, Materials Letters, 62/3 (2008), 341-345.
- "Oxidized Multi-Walled Carbon Nanotube Film Fabrication and Characterization” by Kastanis D., Tasis D., Papagelis K., Parthenios J., Tsakiroglou C., Galiotis C., Advanced Composites Letters, 16/6 (2007), 243-248
- “Covalently functionalized carbon nanotubes as macroinitiators for radical polymerization” by Papagelis, K, Kalyva, M, Tasis, D, Parthenios, I, Siokou, A, Galiotis, C, Physica Status Solidi B-Basic Solid State Physics, 244/11(2007), 4046-4050
- “High pressure Raman study of the second-order vibrational modes of single- and double-walled carbon nanotubes” by Papagelis, K, Andrikopoulos, KS, Arvanifidis, J, Christofilos, A, Galiotis, C, Takenobu, T, Iwasa, Y, Kataura, H, Ves, S, Kourouklis, GA., Physica Status Solidi B-Basic State Physics, 244/11 (2007), 4069-4073
- “Growth of calcium carbonate on non-covalently modified carbon nanotubes” by D. Tasis, S. Pispas, C.Galiotis and N. Bouropoulos, Materials Letters, 61/28 (2007), 5044-5046.
- “Water-solube carbon nanotubes by redox radical polymerization” by D.Tassis, K.Papageelis, M.Prato, I.Kallitsis and C.Galiotis, Macromolecular Rapid Communications, 28/15 (2007), 1553-1558
- “Transformation fatique and stress relaxation of shape memory alloy wires” byP Pappas, D Bollas, J Parthenios, V Dracopoulos and C Galiotis, Smart Mater. Struct. 16/6 (2007) 2560-2570
- “Analysis of matrix cracking in GFRP laminates using Raman spectroscopy” by D.T.G. Katerelos, P.Lundmark, J.Varna and C.Galiotis, Composites Science and Technology, 67/9, 1946-1954 (2007)
- “Stress generation by shape memory alloy wires embedded in polymer composites” by D.Bollas, P.Pappas, J.Parthenios and C.Galiotis, Acta materialia, 55/16, 5489-5499 (2007)
- “Phonon stress sensitivity for interface characterization of fibrous composites at various temperatures by G. Anagnostopoulos, J. Parthenios and C. Galiotis, Acta Materialia, 55/11, 3783-3793 (2007)
- “Quantifying crystalline fraction within polymer spherulites” by K. Gatos, C. Minogianni and C. Galiotis, Macromolecules, 40, 786-789 (2007)
- “Raman spectroscopy investigation of stiffness change and residual strains due to matrix cracking” by Katerelos DG, Lundmark P, Varna J and C. Galiotis., Mechanics of Composite Materials, 42 (6), 535-546 (2006)
- “Viscoplastic finite element analysis of matrix crack propagation in model continuous-carbon fibre/epoxy composites” by S. Sirivedin, D.N. Fenner, R.B. Nath and C. Galiotis, Composites Part A: Applied Science and Manufacturing, 37/ 11, 1922-1935 (2006).
- “Effects of inter-fibre spacing and matrix cracks on stress amplification factors in carbon-fibre/epoxy matrix composites, Part II: Hexagonal array of fibres” by D.N. Fenner, R.B. Nath and C. Galiotis, Composites Part A: Applied Science and Manufacturing, 37/ 11, 1936-1943 (2006)
- “Growth of calcium phosphate mineral on carbon nanotube buckypapers” by D. Tasis, D. Kastanis, C. Galiotis, and N. Bouropoulos, Phys. Stat. Sol. (b), 243/13, 3230-3233 (2006)
- “Effect of Off – Axis Matrix Cracking on Stiffness of Symmetric Angle-Ply Composite Laminates” by D. G. Katerelos, L. N. McCartney and C. Galiotis, International Journal of Fracture, 139, 529-536 (2006)
- “Direct measurement of fiber bridging in notched glass-ceramic-matrix composites” by K.G. Dassios and C. Galiotis, Journal of Materials Research, 21/5, 1150-1160 (2006)
- “Effect of Stress and Temperature on the Optical Phonons of Aramid Fibers” by D. Bollas, J. Parthenios and C. Galiotis, Physical Review B, 73, 094103 (2006)
- “Enhancing the Damping of Wind turbine Rotor Blades, the DAMBLADE Project” by P.K.Chaviaropoulos, E.S. Politis, D.J.Lekou, N.N.Sorensen, M.H.Hansen, B.H.Bulder, D. Winkelaar, C.Lindenburg, D.A. Saravanos, T.P.Philippidis, C.Galiotis, M.O.L. Hansen and T.Kossivas, Wind Energy, 9, 163-177 (2006)
- “Design and construction of a vehicular bridge made of glass/polyester pultruded box beams”, by Kostopoulos V, Markopoulos YP, Vlachos DE, Katerelos D, Galiotis C, Tsiknias T, Zacharopoulos D, Karalekas D, Chronis P, Kalomallos D, Plastics Rubber and Composites, 34/4, 201-207 (2005)
- “Global method for measuring stress in polymer fibers at elevated temperatures” by G. Anagnostopoulos, A.G. Andreopoulos, J. Parthenios, C.Galiotis, Applied Physics Letts, 87/13, 131910-2 (2005)
- “Experimental Determination of Stress Concentrations in Composite Laminates and their Effects on Damage Evolution” by D. G. Katerelos and C. Galiotis, Applied Mechanics and Materials, 5-6, 383-390 (2005)
- “Estimation of crystallinity in isotropic isotactic polypropylene with Raman spectroscopy” by C. Minogianni, K.G. Gatos, C. Galiotis, Applied Spectroscopy, 59/9, 1141-1147 (2005)
- “An experimental and theoretical study of the stress transfer problem in fibrous composites”, by G. Anagnostopoulos,J. Parthenios, A. G. Andreopoulos and C. Galiotis, Acta Materialia, 53/15, 4173-4183 (2005)
- “Local strain re-distribution and stiffness degradation in cross-ply polymer composites under tension” by D.G.Katerelos, L.N.McCartney and C.Galiotis, Acta Materialia, 53/12, 3335-3343 (2005)
- “Determination of interface integrity in high volume fraction polymer composites at all strain levels” by G. Anagnostopoulos, D. Bollas, J. Parthenios, G.C. Psarras and C. Galiotis, Acta Materialia, 53/3 (2005), 647-657
- “Axial strain redistribution resulting from off-axis ply cracking in polymer composites” by Dionisis G. Katerelos and Costas Galiotis, Applied Physics Letters, 85/17, 3752-3754 (2004).
- "Fluorescence Studies of Polycrystalline Al2O3 Composite Constituents: Piezo-Spectroscopic Calibration and Applications" by Konstantinos G. Dassios and Costas Galiotis, Applied Physics A79, 647-659 (2004)
- “Mechanically and thermally induced chain conformational transformations between helical form I and trans-planar form III in syndiotactic polypropylene using FT-IR and Raman spectroscopic techniques” K.G. Gatos, G. Kandilioti, C. Galiotis, V. G. Gregoriou, Polymer, 45/13, 4453-4464 (2004)
- “Compressive failure mechanisms in multi-fibre microcomposites”, S. Goutianos, C. Galiotis, T. Peijs, Composites-Part A, 35/4, 461-475 (2004)
- "Mechanisms of stress transfer and interface integrity in carbon/epoxy composites under compression loading. Part II: Numerical approach" by S. Goutianos, T. Peijs and C. Galiotis, Int. J. Solids & Structures, 40/21, 5521-5538 (2003)
- “Stress and temperature self-sensing fibres” by G.C. Psarras, J. Parthenios, D. Bollas and C. Galiotis
Chem. Phys. Lett. 367, 270-277 (2003) - “Effects of inter-fibre spacing and matrix cracks on stress-amplification factors in carbon-fibre/epoxy matrix composites, Part 1: Planar array of fibres” by Sirivedin, S., Fenner, D.N., Nath, R.B. & Galiotis, C., Composites- Part A, 34, 1227-1234 (2003)
- "Direct In Situ Measurements of Bridging Stresses in CFCCs", by Konstantinos G. Dassios, Costas Galiotis, Vassilis Kostopoulos and Marc Steen, Acta Materialia, 51/18, 5359-5373 (2003)
- “Stress Transfer Efficiency in Model Composites under Dynamic Loading” by C. Koimtzoglou, V. Kostopoulos and C. Galiotis, Applied Physics-A, 76/2, 231-239 (2003)
- “Progress in Composites with Embedded Shape Memory Alloy Wires” by J. Schrooten, V. Michaud, J. Parthenios, G. C. Psarras, C. Galiotis, R. Gotthardt, J. A. Manson and J. Van Humbeeck, Materials Transactions (The Japan Institute of Metals), 43/5, 961-973 (2002)
- “Aramid Fibers; a Multifunctional Sensor for Monitoring Stress/ Strain Fields and Damage Development in Composite Materials” by J. Parthenios, D. G. Katerelos, G. C. Psarras and C. Galiotis, Engineering Fracture Mechanics, 69, 1067-1087 (2002)
- “Mechanisms of stress transfer and interface Integrity in Carbon/ Epoxy Composites under Tension and Compression Loading. Part 1: Experimental Investigation” by S.Goutianos, T. Peijs and C. Galiotis, Int. J. Solids & Structures, 39/12, 3217-3231 (2002)
- “Comparative Assessment of Stress Transfer Efficience in Tension and Compression” by Goutianos S., Peijs T., Galiotis C., Compos.Part A-Appl. S., 33, 1303-1309 (2002)
- “Adaptive Composites Incorporating Shape Memory Alloy Wires; Part 2: Development of internal recovery stresses as a function of activation temperature” by J. Pathenios, G. C. Psarras and C. Galiotis, Composites-Part A, 32/12, 1735-1747 (2001)
- “Detailed Atomistic Molecular Dynamics Simulation of the Orthorombic Phase of Crystalline Polyethylene with the COMPASS Force Field” by I-E Mavrantzas, D. Prentzas, V. G. Mavrantzas, and C. Galiotis, Journal of Chemical Physics, 115/ 8, 3937-3950 (2001)
- “Adaptive Composites Incorporating Shape Memory Alloy Wires; Part 1: Probing the internal stress and temperature distributions with a laser Raman sensor” by G. C. Psarras, J. Pathenios and C. Galiotis, Journal of Materials Science, 36, 535-546 (2001)
- “Modelling the Stress Transfer Efficiency in Carbon/ Epoxy Composites”, by A. Paipetis and C. Galiotis, Proc. Royal Soc.–A 457, 1555-1577 (2001)
- “Micromechanics of Reinforcement and Damage Initiation in Carbon Fibre/ Epoxy Composites under Fatigue Loading” by C. Koimtzoglou, V.Kostopoulos and C. Galiotis, Composites Part A, 32, 457-471(2001)
- “Matrix Crack Propagation Criteria for Model Short Carbon Fibre-Epoxy Composites” by S. Sirivedin, D. N. Fenner, R. B. Nath and C. Galiotis, Composite Science & Technology, 60/15, 2835-2847 (2000)
- “The progressional approach to interfacial failure in carbon reinforced composites: elasto-plastc finite element modelling of interface cracks”, R. B. Nath, D. N. Fenner and C. Galiotis Composites-Part A, 31, 929-943 (2000)
- “Measurement and Modeling of the Stress Concentration at a Circular Notch in Composite Materials” by B. P. Arjyal, D. G. Katerelos, C. Filiou and C. Galiotis, Journal of Experimental Mechanics, 40/ 3, 248-256 (2000)
- ‘Determination of Molecular Changes in Soft Tissues Under Strain Using Laser Raman Microscopy’, Y-N. Wang, C. Galiotis and D. L. Bader, Journal of Biomechanics, 33, 483-487 (2000)
- “Unification of Fibre/ Matrix Interfacial Measurements with Laser Raman Spectroscopy”, by C. Galiotis, A. Paipetis and C. Marston, J. Raman Spectroscopy, 30/10, 899-912 (1999)
- “In-Situ Monitoring of the Fibre Strain Distribution in Carbon Fibre Thermoplastic Composites Using Laser Raman Spectroscopy; Part 1- Effect of Applied Tensile Stress” by C. Filiou and C. Galiotis, Composites Science & Technology, 59/14, 2149-2161 (1999)
- “Surface and Bulk Stress/Strain Measurements in Composite Laminates with a Fibre Optic Raman Probe” by B. P. Arjyal, P.A. Tarantili, A.G. Andreopoulos and C. Galiotis, Composites, 30/10, 1187-1195 (1999)
- ‘‘Stress Transfer From the Matrix to the Fibre in a Fragmentation Test: Raman Experiments and Analytical Modeling by A. Paipetis, Y-C Liu, C. Galiotis and J. A. Nairn, Journal of Composite Materials, 33/4, 377-399 (1999)
- “On the Failure of Unidirectional Carbon-Epoxy Composites- Part 1: The Effect of Fibre Sizing upon Filament Fracture and Damage Evolution”, C. Marston and C. Galiotis, Journal of Materials Science, 33 (1998), 5311-5325
- “Real-Time Micro-Raman Measurements on Stressed Polyethylene Fibres. Part 1- Strain rate effects and molecular stress redistribution” by P.A. Tarantili, A.G. Andreopoulos and C. Galiotis, Macromolecules, 31/20, 6954-6976 (1998)
- ‘Residual Strain and Young’s Modulus Determination in Cross-Ply Composites with an Embedded Aramid Fibre Strain Sensor’, B.P. Arjyal, C. Galiotis, S. L. Ogin and R. D. Whattingham, Composites Part A, 29/11, 1363-1369 (1998)
- ‘Monitoring Local Strain Magnification in Cross-Ply Composites with an Embedded Aramid Fibre Strain Sensor’, B.P. Arjyal, C. Galiotis, S. L. Ogin and R. D. Whattingham, Journal of Materials Science, 33/11, 2745-2750 (1998)
- ‘Definition and Measurement of the Shear-Lag Parameter Beta as an Index of the Stress Transfer Efficiency in Polymer Composites’ by C. Galiotis and A. Paipetis, Journal of Materials Science, 33/5, 1137-1143 (1998)
- ‘‘Application of Composites to Civil Engineering Structures; Shear and Bending of Beam-to-Column Composite Sections’’ by E. Gutierrez, G. Verzeletti and C. Galiotis, Advanced Composites Letters, 6/2, 47-52 (1997)
- “Raman Vibrational Studies of Atactic and Syndiotactic Polystyrene- Part 2: Use of the ν1 Fundamental Vibrational Mode as a Quantitative Measure of Crystallinity within Isotropic Materials” by E. J. C. Kellar, A. Evans, C. Galiotis and E. H. Andrews, Macromolecules, 30/ 8, 2400-2407 (1997)
- “Effects of Interface, Volume Fraction and Geometry upon Stress Re-Distribution in Polymer Composites under Tension” by V.Chohan and C.Galiotis, Composites Science and Technology, 57/8, 1089-1101(1997)
- “Measurement of Stress Concentration around Fibre Breaks in Carbon/ Epoxy Resin Composite Tows” by C. Marston, B. Gabbitas, J. Adams, S. Nutt, P. Marshall and C. Galiotis, Composite Science and Technology, 57/8, 913-923 (1997)
- “The Structure and Morphology of Syndiotactic Polystyrene Injection Moulded Coupons” by A. M. Evans, E. J. C. Kellar, J. Knowles, C. Galiotis and E. H. Andrews, Pol. Science & Eng., 37/1, 153-165 (1997)
- “A Study of the Stress-Transfer Characteristics in Model Composites as a Function of Material Processing, Fibre Sizing and Temperature of the Environment” by A. Paipetis and C. Galiotis, Composite Science and Technology, 57/8, 827-838 (1997)
- "Fibre-Matrix Mechanical Interaction in Carbon Fibre / Bismaleimide Model Composites ", J .P. Favre, M. H. Auvray, P. CheneauHenry, C. Galiotis, C. Vlattas, A. Paipetis, M. Pegorano, F. Severini, L. DiLandro, L. J. Yuan, Polymer Composites, 17/6, 937-947 (1996)
- “Failure Characteristics in Carbon Epoxy Composite Tows” by C. Marston, B. Gabbitas, J. Adams, S. Nutt, P. Marshall and C. Galiotis, Composites, 27A/12, 1183-1194 (1996)
- “Measurement of Strain Distribution in Fibre Reinforced Ceramic Matrix Composites” by F. Bollet, C. Galiotis and M. J. Reece, Composites, 27A, 729-735 (1996)
- “Effect of Sizing on the Stress Transfer Characteristics and Interface Failure Modes of Model Carbon Fibre/ Epoxy Composites by A. Paipetis and C. Galiotis, Composites, 27A, 755-767 (1996)
- “Interfacial Measurements and Fracture Characteristics of 2D Microcomposites Using Remote Laser Raman Microscopy” by V. Chohan and C. Galiotis, Composites, 27A, 881-888 (1996)
- “Elasto-Plastic Finite Element Modelling of Interfacial Failure in Model Kevlar 49 Fibre/ Epoxy Composites” by R. B. Nath, D. N. Fenner and C. Galiotis, Composites, 27A (1996), 821-832
- “Finite Element Mocdelling of Interfacial Failure in Model Carbon Fibre-Epoxy Composites” by R. B. Nath, D. N. Fenner and C. Galiotis, Journal of Materials Science, 31, 2879-2883 (1996)
- “Stress-Strain Measurements in Advanced Composites Using Remote Laser Raman Microscopy” B. Ajyal, A. Paipetis and C. Galiotis, Non-Destructive Testing and Evaluation, 12, 355-366 (1996)
- "Characterisation of PAN-based Carbon Fibres with Laser Raman Spectroscopy. Part 1: Effect of Processing Variables on Raman Band Profiles" by N. Melanitis, P. L. Tetlow and C. Galiotis, Journal of Materials Science, 31, 851-860 (1996)
- “Remote Laser Raman Microscopy (ReRaM); Part 1 Design and Testing of a Confocal Microprobe” A. Paipetis, C. Vlattas and C. Galiotis, Journal of Raman Spectroscopy, 27 (1996) 519-526
- “Raman Vibrational Studies of Atactic and Syndiotactic Polystyrene- Part 1: Assignment of a conformation/ crystallinity sensitive spectral region” by E. J. C. Kellar, C. Galiotis and E. H. Andrews, Macromolecules, 29, 3515-3520 (1996)
- "Analysis of Stress Transfer from the Matrix to the Fiber Through an Imperfect Interface: Application to Raman data and Single-Fiber Fragmentation Test”, J. Nairn, Y-C Liu and C. Galiotis, ASTM-STP 1290, eds. J. C. Spragg and L. T. Drzal, American Society for Testing and Materials, 47-65 (1996)
- "Interfacial Measurements in Single and Multi-fibre Composites Using the Technique of Laser Raman Spectroscopy" by C. Galiotis, V. Chohan, A. Paipetis and C. Vlattas, ASTM-STP 1290, eds. J. C. Spragg and L. T. Drzal, American Society for Testing and Materials, 19-33 (1996)
- “Localised Stress Measurements in Composite Laminates Using a Raman Stress Sensor, B. Ajyal, and C. Galiotis, Advanced Composite Letters, 4/2 47-52, (1995)
- “Determination of Stress Distribution in Fibre Bridged Cracks in Ceramic Matrix Composites “ by F. Bollet, C. Galiotis and M. J. Reece, Advanced Composites Letters, 3/4 127-131, (1994)
- "Compressional Behaviour of Carbon Fibres. Part 2: Modulus Softening" by N. Melanitis, P. L. Tetlow, C. Galiotis and S. S. Smith, Journal of Materials Science, 29 786-799, (1994)
- "Modelling of Stress Transfer in Fibre Composites" by F. J. Guild, C. Vlattas and C. Galiotis, Composites Science & Technology, 50 319-332 (1994)
- "Environmental Degradation Studies of the Interface in Single-Filament Graphite/ Epoxy Composites Using Laser Raman Spectroscopy" by M. S. Amer, M. J. Koczak, C. Galiotis, L. S. Schadler, Advanced Composites Letters, 3/1 17-20, (1994)
- "Deformation Behaviour of Liquid Crystal Polymer fibres: Part 1. Converting spectroscopic data into mechanical stress-strain curves in tension and compression" by C. Vlattas and C. Galiotis, Polymer, 35/11 2335-2347, (1994)
- "Monitoring the Micromechanics of Reinforcement in Carbon fibre/ epoxy resin systems" by N. Melanitis, C. Galiotis, P. L. Tetlow and C. K. L. Davies, Journal of Materials Science, 28 1648-1654, (1993)
- "Interfacial Shear Stress Distribution in Model Composites; Part 3, The Effect of Fibre Modulus", C. Galiotis, P. L. Tetlow and C. K. L. Davies, Composites, 24 457 (1993)
- "Stress-Transfer Characteristics in Model Composites" by C. Galiotis, Composite Interfaces, 1/4, 321-336, (1993)
- "A Study of Mechanisms of Stress-Transfer in Continuous and Discontinuous Fibre Model Composites Using Laser Raman Spectroscopy" by, C. Galiotis, Composites Science & Technology, 48 15-28, (1993)
- "Strain Mapping in Aramid/ Epoxy Microcomposites" by K. M. Atallah and C. Galiotis, Composites, 24/8 635-642, (1993)
- "Interfacial Micromechanics Using Laser Raman Spectroscopy" by N. Melanitis and C. Galiotis, Proc. of Royal Soc.-A, 440 379-398, (1993)
- "Residual Stress Distribution in Carbon Fibre/ Thermoplastic Matrix Pre-impregnated Composite Tapes" by C. D. Filiou, C. Galiotis and D. N. Batchelder, Composites, 28/1 28-37, (1992)
- “Interfacial Studies on Carbon/ Thermoplastic Model Composites Using Laser Raman Spectroscopy" by L. S. Schadler, N. Melanitis, C. Galiotis, J. C. Figueroa and C. Laird, J. Mater. Sci., 27/6 1663-1671, (1992)
- "Interfacial Shear Stress Distribution in Model Composites; Part 2, Fragmentation studies on Carbon Fibre/ Epoxy systems" by N. Melanitis, C. Galiotis, P. L. Tetlow and C. K. L. Davies, Journal of Composite Materials, 26 574-610, (1992)
- "Phase Transformation around Indentations in Zirconia" by M. J. Reece, P. L. Tetlow and C. Galiotis, Journal Materials Science-Letters, 11 575-577, (1992)
- "Interfacial Shear Stress Distribution in Model Composites; Part 1, A Kevlar 49 fibre in an Epoxy Matrix" by H. Jahankhani and C. Galiotis, Journal of Composite Materials, 25 609-631, (1991)
- "The study of Model Polydiacetylene/ Epoxy Composites; Part 3. The Effect of Volume Fraction" I. M. Robinson, C. Galiotis, D. N. Batchelder and R. J. Young, Journal of Materials Science, 26/9 2293-2299 (1991)
- "Monitoring the Behaviour of Polymer Fibres under Axial Compression" by C. Vlattas and C. Galiotis, Polymer, 32/10 1788-1793, (1991)
- "Interfacial Studies on Model Composites Using Laser Raman Spectroscopy" by C. Galiotis, Composites Science and Technology, 42 125-150, (1991)
- "Compressional Behaviour of Carbon Fibres: Part 1; A Raman Spectroscopic Study" by N. Melanitis and C. Galiotis, Journal of Materials Science, 25/12 5081-5090, (1990)
- "Strain Dependences of the First and Second Order Raman Spectra of Carbon Fibres, by C. Galiotis and D. N. Batchelder, Journal of Materials Science- Letters, 7 545-547, (1988)
- "Residual Strain Mapping in Carbon Fibre/PEEK Composites" by C. Galiotis, N. Melanitis, D. N. Batchelder, I. M. Robinson and J. A. Peacock, Composites, 4 321-324, (1988)
- "Chain Stretching in Aramid Fibres" by S. Van der Zwaag, M. G. Northolt, R. J. Young, I. M. Robinson, C. Galiotis and D. N. Batchelder, Polymer Communications, 28 276-277, (1987)
- "The Study of Model Polydiacetylene/Epoxy Composites Part 2", by I. M. Robinson, R. J. Young, C. Galiotis and D. N. Batchelder, Journal of Materials Science, 22 3642-3646, (1987)
- "Strain Dependence of the Raman Frequencies for Different Types of Carbon Fibres", by I. M. Robinson, M. Zakhikani, R. J. Day,R. J. Young and C. Galiotis, Journal of Materials Science-Letters, 6 1212-1214, (1987)
- "Stress Induced Twinning of Polydiacetylene Single Crystal Fibres in Composites" by I. M. Robinson, P. H. Yeung, C. Galiotis, R. J. Young and D. N. Batchelder, Journal of Materials Science, 21 3440-3444, (1986)
- "Strain Dependence of the Raman Frequencies of a Kevlar 49 Fibre" by C. Galiotis, I. M. Robinson, R. J. Young, B. J. E. Smith and D. N. Batchelder, Polymer Communications, 26 354-355, (1985)
- "High Modulus Polydiacetylene Single Crystal Fibres" by C. Galiotis, R. T. Read, P. H. J. Yeung and R. J. Young, Journal of Polymer Science: Polymer Physics Edition, 22 1589-1606, (1984)
- "The Study of Model Polydiacetylene/Epoxy Composites, Part 1. The Axial Strain in the Fibre" by C. Galiotis, R. J. Young, P. H. Yeung and D. N. Batchelder, Journal of Materials Science, 19 3640-3648, (1984)
- "A Resonance Raman Spectroscopic Study of the Strength of the Bonding Between an Epoxy Resin and a Polydiacetylene Fibre" by C. Galiotis, R. J. Young and D. N. Batchelder, Journal of Materials Science- Letters, 2 263-266, (1983)
- "Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part III: Mechanical Properties" by C. Galiotis, R. J. Young, Polymer, 24 1023-1030, (1983)
- "Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part II: Resonant Raman Spectroscopy" by C. Galiotis, R. J. Young and D. N. Batchelder, Journal of Polymer Science: Polymer Physics Edition, 21/12 2483-2494, (1983)
- "Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part I: Crystal Modification and Polymerisation Kinetics" by C. Galiotis, R. J. Young, D. J. Ando and D. Bloor, Macromolekulare Chemie, 184 1083-1095, (1983)