Dr. George Anagnostopoulos is a Senior Research Fellow of the Composite and Nanomaterials Laboratory of FORTH/ICE-HT. He has a BSc in Chemical Engineering of NTUA, a MSc in Polymer Science and Technology of University of Patras and a PhD in Chemical Engineering of NTUA. His PhD thesis is entitled: “Study of stress transfer mechanisms and the development and propagation of failure in fiber reinforced composites”. During his BSc and MSc studies he received scholarships by the State Scholarship Foundation of Greece and University of Patras, respectively, for his performance. As a PhD student, he was responsible for planning and scientific completion of a project with a title: “Study and Development of Smart Polymer Matrix Composites Incorporating Shape Memory Alloy Wires”, funded by General Secretariat of Research and Technology, Ministry of Education of Greece

1. “Stress/Strain Measurements in Fibers and Composites Using Raman Spectroscopy” by Costas Galiotis, John Parthenios, V.G. Gregoriou and M. Braiman, Taylor & Francis Co, New York, NY  pp.35-98, (2005)
2. “Interfacial damage modelling of composites”, by C.Galiotis and A. Paipetis, in “Multi-Scale Modelling of Composite Materials” ed. by C. Soutis and P. Beaumont, Woodhead Publishing Ltd., pp. 33-64 (2005)
3. “The effect of interface on the fatigue performance of fibre composites, in Fatigue in Composite Materials: A Review of the Science and Technology of the Fatigue Response of Fibre-Reinforced Plastics”, by Galiotis C. and Koimtzoglou C., Ed. B. Harris, Woodhead Publishing Ltd., October 2003
4. “In Situ Assessment of the Micromechanics of Large Scale Bridging in Ceramic Composites, in Recent Advances in Composite Materials”, ed. by K. G. Dassios, C. Galiotis, V. Kostopoulos and M. Steen publ. by Kluwer Academic Publishers USA, (2003)
5. “Strain Redistribution in Composite Laminates resulting from off  axis ply cracking” by D. G. Katerelos, J. Parthenios and C. Galiotis, in “Recent Advances in Composite Materials ”, Ed. E.E. Gdoutos and Z. Margioli  Riga, Kluwer Academic Publ., USA (2003), 139-150
6. “Micromechanics of Reinforcement using Laser Raman Spectroscopy” by C. Galiotis in “Microstructural Characterisation of Fibre-Reinforced Composites” ed. by J.Summerscales, publ. by Woodhead Publishing Ltd., Cambridge, England (1998), 224-253
7. "The Mechanical Properties of Polypyrrole Plates" by D. Bloor, R. D. Hercliffe, C. Galiotis and R. J. Young, in "Electronic Properties of Polymers and Related Compounds", Springer Series in Solid-State Sciences, 63 (1985), p.179, edited by H. Kuzmany, A. Metring and R. S. Roth

In Refereed Proceedings

1. “Raman Spectroscopy Investigation of Stiffness Change and Residual Strains due to Matrix Cracking” by P. Lundmark, D. G. Katerelos, J. Varna and C. Galiotis, Mechanics of Composite Materials MCM-2006 XIV International Conference, Riga, Latvia, 29 May – 2 June, 2006
2. “Raman Spectroscopy Assessment of Stiffness Reduction and Residual Strains due to Matrix Cracking in Angle – Ply Laminates” by P. Lundmark, D. G. Katerelos, J. Varna and C. Galiotis, Proceedings of the 16th European Conference on Fracture, July 3 – 7, 2006, Alexandroupolis, Greece
3. “An experimental and theoretical study of the stress transfer mechanism in fibrous composites” by  Anagnostopoulos G., Parthenios J. and Galiotis C., Proceedings of extended abstracts of International Conference on Interfaces & Interphases in Multicomponent Materials, pages 179-180, September 12-14, (2005), Centre Culturel Villeurbanne - Lyon, France
4. “A new methodology for measuring stress in polymer fibres through interface interactions at elevated temperatures”, by Anagnostopoulos G., Parthenios J. and Galiotis C., Proceedings of  extended abstracts International Conference on Interfaces & Interphases in Multicomponent Materials, pages 185-186, September 12-14, (2005), Centre Culturel Villeurbanne - Lyon, France
5. “Smart Composites Incorporating Shape Memory Alloy Wires: Stress Transmission Through the Wire/ Polymer Interface”, by D. Bollas,  J. Parthenios and C. Galiotis, Proceedings of International Conference on Interfaces & Interphases in Multicomponent Materials, p. 207 September 12-14, (2005), Centre Culturel Villeurbanne - Lyon, France
6. “Evaluation of Energy Dissipation Mechanisms in Continuous-Fibre Reinforced Composites via Direct In Situ Measurements in the Microscale”, by K.G. Dassios and C. Galiotis, Proceedings of Advancing with Composites 2005 / International Meeting on Composites Materials,  October 11-14, 2005, Naples, Italy, pages 153
7. “Design and construction of a vehicular bridge made of glass/polyester    pultruded box beams” by Kostopoulos, V,   Markopoulos, YP,  Vlachos, DE,    Katerelos, D., Galiotis, C  Tsiknias, T, Zacharopoulos, D, Karalekas, D, Chronis, P, Kalomallos, D., 9th International PVC Conference,   Brighton, U.K., April  26-28, 2005  MANEY PUBLISHING, ISBN 1465-8011
8. “Investigation of stress transfer mechanisms in fibre reinforced composites under tension and compression”, by Anagnostopoulos G., Koimtzoglou C., Bollas D., Goutianos S., Parthenios J., Psarras G. C. and Galiotis C., Proceedings of COMP 2003 5th Intern. Symposium on Advanced Composites, Session: Joints and Interfaces, May 5-7, (2003), Corfu, Greece
9. “Effect of mechanical and thermal load on the raman spectra of aramid fibres”, by D. Bollas, J. Parthenios, G. C. Psarras and C. Galiotis, 15th European Symposium on Polymer Spectroscopy , Hersonissos, Crete, Greece, June 8-12 2003
10.  “Monitoring Local Strains and Stiffness Degradation in Cracked Cross – Ply Composites” by D. G. Katerelos, L. N. McCartney and C. Galiotis, Proceedings of COMP ’03: Advances in Composite Technology, May 5 – 7, 2003, Corfu, Greece, Transfer and Business Partnership Event, 2004 , Thessaloniki, Greece , ed D. Van Hemelrijck, A. Anastasopoulos, N.E. Melanitis , 2004 Swets & Zeitlinger, Lisse , 67 -72 , ISBN: 90 5809 645 9
11. "Interfacial Shear Stress Monitoring in Model Composites" by C. Vlattas, H. Jahankhani and C. Galiotis in "Advanced Composites in Emerging Technologies", ed. S. A. Paipetis and T. P. Philippidis, Amatec Publications, Patras, Greece (1992), 460-469
12. "Non-Destructive Testing by Laser Raman Spectroscopy" by C. Galiotis in "Advanced Composites in Emerging Technologies", ed. S. A. Paipetis and T. P. Philippidis, Amatec Publications, Patras, Greece (1992), 324-334
13. "Testing Carbon Fibres in Compression" by N. Melanitis, P.L. Tetlow, C. Galiotis and C. K. L Davies in "Advanced Composites in Emerging Technologies", ed. S. A. Paipetis and T. P. Philippidis, Amatec Publications, Patras, Greece (1992), 196-203
14. "Characterisation of Aramid Fibres and Examinations of Aramid-Epoxy Interfaces" using Laser Raman Specroscopy" by H. Jahankhani and C. Galiotis in "Phase Interactions in Composite Materials", edited by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1992), 406-416
15. "Strain Dependences of the Raman Spectra of Carbon Fibres and Residual Strain Mapping in Composites" by N. Melanitis, C. Galiotis and D. N. Batchelder in "Phase Interactions in Composite Materials", edited  by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1992), 417-427
16. "Raman Optomechancal Studies on Fibres, Composites and Fibre-Matrix Interfaces" by C. Galiotis in "Phase Interactions in Composite Materials", edited  by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1992), 173-184
17. "A New Technique for Assessing the Compressive Behaviour of Single Filaments" by C. Galiotis, N. Melanitis and H. Jahankhani, Proceedings of the IMechE, FRC'90, Fibre Reinforced Composites, 27-29 March 1990, University of Liverpool, 81-87
18. "Polydiacetylene Single Crystal Fibres and Composites" by R. J. Young, C. Galiotis, I. M. Robinson and D. N. Batchelder, "Engineering Applications of New Composites", edited by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1988), 49-56
19. "Strain Measurements in Aramid Fibre and Composites Using Raman Spectroscopy" by C. Galiotis, I. M. Robinson, D. N. Batchelder and R. J. Young, "Engineering Applications of New Composites", edited by S. Paipetis and G. Papanicolaou, Omega Scientific, Wallingford, UK (1988), 409-420

In Non-Refereed Proceedings

1. "Processing of high volume fraction epoxy composites reinforced by carbon nanotubes" by D.Tasis, D.Kastanis, Z.Spitalsky, K.Papagelis, J. Parthenios, C.Galiotis, 3rd International symposium on Nanostructured and Functional Polymer-Based Materials and Nanocomposites, May 13-15, (2007), Corfu (Greece)
2. “Chemical Oxidation of Multi Walled Carbon Nanotubes” by M. Kalyva, V. Datsuyk, K.Papagelis, J.Parthenios, A.Siokou, I. Kallitsis, C.Galiotis, 3rd International symposium on Nanostructured and Functional Polymer-Based Materials and Nanocomposites, May 13-15 (2007), Corfu, Greece
3. “Production and Mechanical behavior of high volume fraction epoxy nanocomposites based on functionalized carbon nanotubes as reinforcements” by D.Kastanis, J.Parthenios, K.Papagelis, 3rd International symposium on Nanostructured and Functional Polymer-Based Materials and Nanocomposites, May 13-15 (2007), Corfu, Greece
4. “Characterisation of carbonaceous materials at nono-level using laser raman spectroscopy”, Melanitis Nickos, C.Galiotis, 3rd International symposium on Nanostructured and Functional Polymer-Based Materials and Nanocomposites, May 13-15 (2007), Corfu, Greece
5. “In situ characterization of stress transfer efficiency in full polymer composites at all temperatures” by Anagnostopoulos G., Parthenios J. and Galiotis C., Proceedings of COMP 2007 6th International Symposium on Advanced Composites Session 1: Mechanical Properties, May 16-18, (2007), Corfu, Greece
6. “Production and Mechanical Behavior of High Volume Fraction Epoxy Nanocomposites based on Carbon Nanotubes as reinforcements”  by D. Kastanis, J. Parthenios, K. Papagelis, C.Galiotis, EUROMAT 2007, Nuremberg, Germany, 10-13 September 2007
7. “Estimating the interface integrity in fibrous composites at all temperatures” by G. Anagnostopoulos, J. Parthenios, C. Galiotis, Proceedings of 12th European Conference on Composite Materials, Session: Interface I, p.59, August 29 – September 1, (2006), Biarritz, France
8. “Micro-scale distribution in adaptive composite systems” by D. Bollas, J. Parthenios and C. Galiotis, Proceedings of 12th European Conference on Composite Materials, Session: Functional Composites I, August 29 – September 1, (2006), Biarritz, France
9. “A Meso-scopic Experimental Determination of Matrix Damage Effects in Composite Laminates” by D. G. Katerelos, P. Lundmark, J. Varna, L. N. McCartney and C. Galiotis, Proceedings of 12th European Conference on Composite Materials, Session: Damage/Fracture II, August 29 – September 1, (2006), Biarritz, France
10. “Micro- and Macro-Scale Investigation of the “Morphing” Capability of Hybrid Systems” by D. Bollas, P. Pappas,  J. Parthenios and C. Galiotis, Int. Conf. on Micromechanics and Microstructure Evolution. Madrid, September 12-16, 2005
11. “Fatigue and Activation Stress Degradation of Nickel-Titanium Shape Memory Alloy Wires”, by P. Pappas, D. Bollas, J. Parthenios and C. Galiotis  Madrid, Spain, 12-15 September 2005
12. “Non-Destructive Study of Thermal Dissipation in Shape Memory Alloy Hybrid Composite Systems” by D. Bollas, J. Parthenios, and C. Galiotis, ECCM11, Rhodes Greece 2004, May 31- June 3, ISBN: 960-7839-03-X
13. “A novel technique for the determination of interface integrity in high volume fraction polymer composites” by G. Anagnostopoulos, J. Parthenios, A. G. Andreopoulos  and C. Galiotis, ECCM11, Rhodes Greece 2004, May 31- June 3. ISBN: 960-7839-03-X
14. “Assessment of Crack Shielding in Ceramic Matrix Composites in the Presence of Large Scale Effects”, by K.G. Dassios, V. Kostopoulos and C. Galiotis and M. Steen, Proceedings of the 11th European Conference on Composite Materials, May 31-June 3, 2004, Rhodes, Greece, ISBN: 960-7839-03-X
15. “A new approach for assessing the interface efficiency on standard full-composite specimens”, by D. Bollas, C. Koimtzoglou, G. Anagnostopoulos, G.C. Psarras, J. Parthenios and C. Galiotis, Proceedings of the 10th European Conference on Composite Materials, Session: Interface-Interphase, June 3-7, (2002), Brugge Belgium
16. “Internal Stress Generation in Composites Incorporating Prestrained Shape Memory Alloy Wires”, by G. C. Psarras, J. Parthenios, D. Bollas and C. Galiotis, Proceedings of the 10th European Conference on Composite Materials, Session: Smart Materials and Construction Components, June 3-7, (2002), Brugge Belgium
17. “Crack-face Bridging Stresses in Carbon/Carbon Composites: Macro-Mechanical Evaluationand Direct In-situ Measurements”, by K.G. Dassios, V. Kostopoulos, C. Galiotis and M. Steen Proceedings of the 10th European Conference on Composite Materials, Session: Interface-Interphase,  June 3-7, 2002, Brugge, Belgium
18. “A Motorway Composite Bridge made of Glass / Polyester pultruded Elements” by V. Kostopoulos, Y. P. Markopoulos, D. E. Vlachos, D. G. Katerelos, C. Galiotis, T. Tsiknias, D. Zacharopoulos, Ch. Kontomitros, D. Karalekas, P. Chronis and D. Kalomallos, Proceedings of ECCM 10, Session: Applications, June 3 – 7, 2002, Brugge, Belgium
19. “Adaptive composites incorporating shape memory alloy wires; Effect of wire/resin interface upon internal stress transmission’, by J. Parthenios, G. C. Psarras, D. Bollas and C. Galiotis 7th international conference on interfacial phenomena in composite materials, September 11-14, 2001 Bordeaux-Arcachon-France
20. “In-situ measurements of the stress transfer efficiency of full composites during mechanical loading” by G. C. Psarras, J. Parthenios, C. Koimtzoglou and C. Galiotis,, 7th international conference on interfacial phenomena in composite materials, September 11-14, 2001 Bordeaux-Arcachon-France
21. 9“Mechanical response of intelligent composite systems activated by shape memory alloys wire”, by G. C. Psarras, J. Parthenios and C. Galiotis ECCM9, Brighton 2000, June 4-7. Τα πρακτικά του συνεδρίου δημοσιεύτηκαν σε CD-ROM
22. “Determination of Stiffness Reduction and Residual Strain, caused by Transverse Cracking, in Composite Laminates using an Embedded Aramid Fibre Strain Sensor” by D. G. Katerelos, C. Galiotis, S. L. Ogin and R. D. Whattingham, Proceedings of ECCM 9, June 4 – 7, 2000, Brighton, UK
23. “A Motorway Composite Bridge made of Glass / Polyester pultruded Elements” by V. Kostopoulos, Y. P. Markopoulos, D. E. Vlachos, D. G. Katerelos, C. Galiotis, T. Tsiknias, D. Zacharopoulos, Ch. Kontomitros, D. Karalekas, P. Chronis and D. Kalomallos, ECCM 10, June 3-7, 2002, Brugge, Belgium
24. "Mechanical Response of Intelligent Composite Systems Activated by Shape Memory Alloys Wires" by G.C.Psarras, J.Parthenios and C.Galiotis, ECCM9, Brighton, UK, 4-7 June 2000
25. "Effect of Fatique Loading Upon the Stress Transfer Efficiency in Carbon Fibre Composites" by C.Koimtzoglou and C.Galiotis, ECCM9, Brighton, UK, 4-7 June 2000
26. "Determination of Stiffness Reduction and Residual Strain Caused by Transverse Cracking Using an Embedded Aramid Fibre Strain Sensor" by D.G.Katerelos, C.Galiotis, S.L.Ogin and R.D. Whattingham, ECCM9, Brighton, UK, 4-7 June 2000
27. “Unification of Fibre/ Matrix Interfacial Measurements with Laser Raman Spectroscopy”, by C. Galiotis, A. Paipetis and C. Marston, ICCM-12, Interfaces & Interphases, Paris, Woodhead Publ., 1999
28. “Bulk and Surface Stress/ Strain Measurements in Composite Laminates with a Fibre-Optic Raman Probe”, C. Galiotis and B. Arjyal, ICCM-12, Smart Materials and Smart Manufacturing, Woodhead Publ., 1999
29. “Raman Spectroscopy as a Tool for Strain Measurements” by C. Galiotis, Proc. Of the Inter. G. Papatheodorou Symp., 17-18 Sept. 1999, Patras, Greece, ISBN:960-7839-01-3, 239-243
30. “A Smart Raman Sensor for Localised Surface and Bulk Stress/ Strain Measurements in Laminates” B. Arjyal and C. Galiotis, ECCM-8, “Science, Technologies and Applications”, ed. I. Crivelli-Visconti, Woodhead Publ. Ltd. (Cambridge), vol.3, ISBN 1 85573 409 5, 1998, 277-279
31. “Monitor the Stress Transfer Characteristics in Composites under Static and Dynamic Loading Conditions”, by C. Koimtzoglou, V. Kostopoulos, C. Galiotis and S. A.Paipetis, ECCM-8, “Science, Technologies and Applications”, ed. I. Crivelli-Visconti, Woodhead Publ. Ltd. (Cambridge), vol.3, ISBN 1 85573 409 5, 1998, 281-283
32. “Non-Destructive Investigation of the Effects of Interface, Volumer Fraction and Geometry upon Stress Redistribution in Polymer Composites under Tension” A. Paipetis, V. Chohan and C. Galiotis, ECCM-8, “Science, Technologies and Applications”, ed. I. Crivelli-Visconti, Woodhead Publ. Ltd. (Cambridge), vol.3, ISBN 1 85573 409 5, 433-434
33. “Structure and Morphology of Syndiotactic Polystyrene’’, by C. Galiotis, 4th Panhellenic Conference on Polymers (1997),  Greek Polymer Society, 102-106
34. “Determination of the Stress Transfer Mechanism in Polymeric Matrix Composite Materials Using the Technique of Laser Raman Spectroscopy’’, by C. Koimtzoglou and C. Galiotis, 4th Panhellenic Conference on Polymers (1997),  Greek Polymer Society, 241-245
35. “Assessing the Effect of Fatigue on the Interfacial Properties of Model Composites Using the Fragmentation Test and the Technique of Laser Raman Microscopy” by C. Koimtzoglou, V. Kostopoulos, N. E. Melanitis, C. Galiotis, Proceedings of the 8th International Conference on Mechanics and Technology of Composite Materials, Sofia, Bulgaria, September 1997,  259-264
36. “Application of a Laser Raman Sensor for Stress Monitoring in Composites” by B. Arjyal and C. Galiotis in “Proceedings of the 3rd International Conference on Intelligent Materials” ICIM’96, Lyon, France, 1996, ed. P.F.Gobin and J.Tatibouet, pub. SPIE Vol. 2779,  142-145, ISBN 0-8194-2165-0
37. “Characterisation of Strain Distribution in Fibres Bridging Ceramic Matrix Cracks by Laser Raman Spectroscopy” by F.Bollet, C. Galiotis and M.J.Reece “Realising Their Commercial Potential”, vol.1, ECCM-7, The Institute of Materials, 1996, publ. Woodhead Publ. Ltd., Cambridge,  505-510
38. “Progression of Interfacial Failure in Kevlar 49 and Carfon Fibre Composites: Elasto-Plastic Finite Element Analysis” by R.B.Nath, D.N.Fenner and C.Galiotis in “Realising Their Commercial Potential”, vol.1, ECCM-7, The Institute of Materials, 1996, publ. Woodhead Publ. Ltd., Cambridge, 27-32
39. “Assessing the Effect of Fibre Sizing, Material Processing and Temperature upon the Stress Characteristics in Composites” by A. Paipetis and C. Galiotis in “Realising Their Commercial Potential”,vol. 2, ECCM-7, The Institute of Materials, 1996, publ. Woodhead Publ. Ltd., Cambridge,  213-218
40. “A Smart Raman Sensor for Localised Stress or Strain Measurements Inside Laminates” by B. Arjyal and C. Galiotis“Realising Their Commercial Potential”, vol.2, ECCM-7, The Institute of Materials, 1996, publ. Woodhead Publ. Ltd., Cambridge,  35-40
41. “Assessing the Strength of the Interface and the Fracture Characteristics of Composites Using the Technique of Laser Raman Microscopy” by C. Galiotis, V. Chohan, A. Paipetis and C. Vlattas in “High Technology Composites in Modern Applications, Comp’95, ed. by S. A. Paipetis and A. G. Youtsos, Univ. Patras, Patras,  54-65
42. “Assessing the Effect of Sizing in Carbon Fibre/ Epoxy Interfaces Using Remote Laser Raman Spectroscopy” by A. Paipetis and C. Galiotis in “High Technology Composites in Modern Applications, Comp’95, ed. by S. A. Paipetis and A. G. Youtsos, Univ. Patras, Patras,  37-45
43. “Micromechanics of Reinforcement in Single and Multifibre Composites” by C. Galiotis, Proceedings of the 4th National Congress on Mechanics, Univ. of Thrace, Greece, June 26-29, 1995,  66-77
44. “Raman Stress Sensor for Localised Stress Measurements in Composite Laminates” by B. Arjyal and C. Galiotis, Smart Structures: Optical Instrumentation and Sensing Systems, Europt Series, Vol. 2509, Ed. D. G. Uttamchandani, SPIE 1995, 99-108, ISBN 0-8194-1867-6
45. “Finite Element Modelling of Interfacial Failure in Carbon Fibre-Epoxy Composites” by R. B. Nath, D. N. Fenner and C. Galiotis, Deformation and Fracture of Composites’95, The Institute of Materials (1995), 606-615
46. “Fracture Characteristics and Interfacial Strength of Full Composites by Remote Laser Raman Microscopy” by C. Galiotis and V. Chohan, Deformation and Fracture of Composites’95, The Institute of Materials (1995), 115-125
47. “Stress/Strain Measurements in Fibres and Composites Using Remote Laser Raman Microscopy” by C. Galiotis, Proceedings of ICORS-14, edited by N-T Yu and X-Y Li, John Wiley & Sons, Chichester (1994), 802-803, ISBN 0-471-95216-8
48. "Studying the Deformation of High Performance Fibres in Tension and Compression by Spectroscopic-Mechanical Methods” by C. Vlattas and C. Galiotis, 9th International Conference on Deformation Yield & Fracture of Polymers Polymers”, Cambridge, 11-14 April 1994, p.12/1
49. “Application of Raman Microscope Spectroscopy to Ceramic Matrix Composites” by F. Bollet, C. Galiotis, M. J. Reece, L. S. Schadler and M. J. Koczak, Royal Microscopic Society, Proceedings, 29/2 (1994), p.93
50. “Laser Raman Microscopy: A New Stress/ Strain Measurement Technique for the  Non-Destructive Inspection of Polymer Composites” by C. Galiotis, Royal Microscopic Society, Proceedings, 29/2 (1994), p.90
51. "The Role of Interface in Polymer Based Composites and Test Methods for Evaluating Its Performance" by C. Galiotis, "Developments in the Science and Technology of Composite Materials", published by Woodhead Publishing Co., Cambridge (1993), eds.A. R. Bunsell, A. Kelly and A. Massiah, 19-30
52. "Microstructural Analysis of Ferroelectric Glass Ceramics" by M. J. Reece, C. A. Worell, G. J. Hill, P. L. Tetlow, C. Galiotis and R. Morell, Proceedings of the 3rd Conference of the European Ceramics Society, Madrid, 13-17 Sept., 1993, vol.2,  217-223
53. "Strain Mapping in Carbon Fibre/ PEEK Composites" by C. Filiou and C. Galiotis, "Deformation, Yield & Fracture of Composites", InstM (1993), paper 7, 1-9
54. "Parallels between Micro- and Macro- Compression Failure in Aligned Fibre Composites"  by C. Galiotis, F. J. Guild, P .J. Hogg, D. Hua, N. Melanitis and P. L. Tetlow in "Deformation, Yield & Fracture of Composites", InstM (1993), paper 26, 1-10
55. "Interfacial Measurements in Single Fibre Model Composites" by C. Galiotis, N. Melanitis, C. Vlattas and A. Wall, "Deformation, Yield & Fracture of Composites", InstM (1993), paper 14, 1-10
56. "In-situ Strain Measurements in Carbon-Fibre/ Thermoplastic Composites" by C. Filiou, C. Galiotis, PEG publications (1992), GR/G 10890
57. "Interface Micromechanics in Aramid/ Epoxy Model Composites" by C. Vlattas and C. Galiotis in "Developments in the Science and Technonogy of Composite Materials", ECCM 5, eds. A. R. Bunsell, J. F. Jamet and A. Massiah, Bordeaux, France (1992),  415-420
58. "Fibre Strain Distribution and Residual Thermal Stresses in Carbon Fibre/ PEEK Composites" by C. Galiotis and Filiou, in "Developments in the Science and Technonogy of Composite Materials", ECCM 5, eds. A. R. Bunsell, J. F. Jamet and A. Massiah, Bordeaux, France (1992),  397-402
59. "Molecular Deformation of High Performance Fibres in Tension and Compression"  by N. Melanitis and C. Galiotis in "Developments in the Science and Technonogy of Composite Materials", ECCM 5, eds. A. R. Bunsell, J. F. Jamet and A. Massiah, Bordeaux, France (1992),  213-318
60. "Monitoring the Fibre Strain Distribution in Carbon Fibre/ PEEK Composites" by C. Filiou and C. Galiotis, FRC'92, pub. "The Plastics & Rubber Institute" (London), paper 18/1-10 (1992)
61. "Modelling Aramid-Epoxy Interfaces Using Finite Element Analysis" by F. J. Guild, C. Galiotis, H. Jahankhani and C. Vlattas, in "Interfacial Phenomena in Composite Materials '91", ed. by I. Verpoest and F. Jones, Butterworth-Heinemann (1991),  26-29, ISBN 0-7506-0356-9
62. "Fragmentation Studies on Carbon Fibre/ Epoxy Systems Using  Laser Raman Spectroscopy" by N. Melanitis, P. L. Tetlow, C. Galiotis and C. K. L. Davies, "Interfacial Phenomena in Composite Materials '91", ed. by I. Verpoest and F. Jones, Butterworth-Heinemann (1991),  288-289, BN 0-7506-0356-9
63. "Strain Mapping in Carbon Fibre/ Thermoplastic Composites Using Laser Raman Spectroscopy", by C. D. Filiou and C. Galiotis, Proceedings of 1st Conference on Deformation and Fracture of Composites, Manchester, Plastics and Rubber Institute, 20/1-4 (1991), ISBN 1-871571-94-4
64. "Micromechanical Studies on Single Fibre Model Composites" by C. Vlattas and C. Galiotis, Proceedings of 1st Conference on Deformation and Fracture of Composites, Manchester, Plastics and Rubber Institute, 58/1-4 (1991), ISBN 1-871571-94-4
65. "Studies of Carbon Fibres under Axial Compression" by C. Galiotis and N. Melanitis, in "Developments in the Science and Technology of Composite Materials", ECCM-4, 25-28 September 1990, Stuttgart, FRG, ed. J. Fuller et al, Elsevier Applied Science, London and  N. Y.,  525-530, BN 1-85166-562-5
66. "Monitoring Interfacial Phenomena in Single Fibre Model Composites" by C. Galiotis and H. Jahankhani, in "Developments in the Science and Technology of Composite Materials", ECCM-4, 25-28 September 1990, Stuttgart, FRG, ed. J. Fuller et  al, Elsevier Applied Science, London and N. Y.,  679-684, ISBN 1-85166-562-5
67. "Interfacial Shear Stress Mapping in Model Composites" by C. Galiotis, N. Melanitis, P. L. Tetlow and C. K. L. Davies, Proceedings of the American Society for Composites, 5th  Technical Conference, June 12-14 (1990), East Lansing, Michigan, 276-286
68. "Interfacial Studies on Aramid/ Epoxy Systems" by H. Jahankhani and C. Galiotis in Proceedings of ICCM-VII, ed. by W.Yunshu et al, Guangzhou, China, vol.2, 143-148, International Academic Publishers, Pergamon Press, Beijing (1990)
69. "Interfacial Studies in aramid/epoxy systems with Laser Raman Spectroscopy" by H. Jahankhani, C. Vlattas and C. Galiotis in "Interfacial Phenomena in Composite Materials '89", ed. F. R. Jones, Butterworths, Sept. 89, 125-131
70. "Characterisation of Carbon Fibre Surfaces and Examination of Carbon Fibre/ Epoxy Interfaces with Laser Raman Spectroscopy" by N. Melanitis, P. Tetlow, C. Galiotis and C. K. L. Davies in "Interfacial Phenomena in Composite Materials '89", ed. F. R. Jones, Butterworths, Sept. 89,  97-104
71. "Raman Optomechanical Studies on Fibres and Composites" by C.Galiotis, H. Jahankhani, N. Melanitis and D.N.Batchelder in "Developments in the Science and Technology of Composite Materials", ECCM3, ed. by A.R.Bunsell, P. Lamicq, A. Massiah, Elsevier Applied Sci., March 1989, 765-770
72. "The Raman Optomechanical Strain Gauge" by D. N. Batchelder and C. Galiotis in "Stress  and  Vibration" ed. by P. Stanley, SPIE, 1084 (1989),  34-44
73. "Interfacial Studies on Kevlar/Epoxy Systems in Tension and Compression" by H. Jahankhani and C. Galiotis in "Interfaces in Polymer, Ceramic and Metal Matrix  Composites", ed. H. Ishida, Elsevier Science, New York (1988), p.107-121
74. "Non-Destructive Evaluation of Composite Materials Using a Raman Optomechanical Strain Gauge", by I. M. Robinson, R. J. Young, C. Galiotis and D. N. Batchelder, ICCM Proceedings, 20-24 July 1987, 1, edited by F. L. Mathews, N. C. R. Buskell and J. Morton, Elsevier Applied Science, 333-340
75. "Measurement of Fibre Strain in All-Polymer Composites" by R. J. Young, C. Galiotis, I. M. Robinson and D. N. Batchelder, Proceedings of "Deformation, Yield and Fracture of Polymers", Churchill College, Cambridge, 1-4 April 1985, Paper 71, edited by the Plastics and Rubber Institute, London, U.K
76. "Structure and Deformation of Polydiacetylene Single Crystal Fibres" by C. Galiotis and R. J. Young, Proceedings of 28th Macromolecular Symposium, IUPAC, 12-16 July 1982, Amherst. Mass., USA, Paper 619, edited by I. Luderwald and R. Weis
77. "Deformation and Fracture of Polydiacetylene Single Crystal Fibres" by D. N. Batchelder, C. Galiotis, R. T. Read and R. J. Young, Proceedings of "Deformation, Yield and Fracture of Polymers", Churchill College, Cambridge, 29 March-1 April 1982, Paper 2, edited by the Plastics and Rubber Institute, London
78. "The Synthesis, Crystal Growth and Solid-State Polymerisation of Closely Related Diacetylene Monomers" by D. J. Ando, D. Bloor, C. Galiotis and I. F. Chalmers, Proceedings of 26th Macromolecular Symp., IUPAC, 17-21 Sept. 1979, Mainz (Germany), Paper A42-41, edit. by I. Luderwald and R. Weis.